Abstract:The experimental study of natural convection for solar collectors with different coating materials and being equipped with guide plate is carried out step by step through the experimental platform of solar-assisted fuel cells under the research background of renewable total energy systems, which mainly include solar energy comprehensive utilization, solid oxide fuel cells, gas turbine and Kalina refrigeration cycle. The three-dimensional mathematical model on natural convection and forced convection of solar collectors is established to study the flow and heat transfer data with the field synergy and entransy principle on the basis of experimental verification. The natural convection results show that the thermal efficiency and the entransy increment rise gradually with the absorption rate increasing from 0.95 to 1.0 and the emission rate decreasing from 0.06 to 0.16, and the thermal efficiency of experiment for high absorption is 1.17% higher than that of low absorption. The thermal efficiency of experiment for solar collectors increases by 2.17% after equipped with guide plate, because the mixed flow in the vacuumvacuum tube disappears and the guide plate strengthens the flow at the bottom of the vacuum tube. The reasonable plate thickness of guide plate for all-glass vacuum tube water heaters is 2 mm, the reasonable plate length of guide plate is 60-100 mm distance from the bottom of the vacuum tube, and the reasonable position of guide plate is 16-20 mm above the axial line of the vacuum tube. The forced convection results show that the Reynolds number and the Nusselt number decrease gradually after the fluent flow into manifold but the Reynolds number and the Nusselt number increase gradually at the exit of manifold. Although the fluent is extremely volatile along the vacuum tube, the Reynolds number and the Nusselt number of horizontal double collectors are higher than that of vertical single collector. The angle between speed vector and temperature gradient vector is 0° with downward fluid and 180° with upward flow, because the collector overall temperature is gradually reduced from vacuum tube bottom to manifold. It makes more fluid absorb the bottom heat, because the internal flow of vacuum tube is smooth and the mixed flow in vacuum tube disappears. Manifold velocity gradually decreases because there is backflow interiorly, but temperature increases because fluid absorbs solar radiation, and the field synergy in collector outlet is higher than others because temperature field is consistent with velocity field according to numerical simulation. Although the entransy increments of vertical single collector and horizontal double collectors are negative values in initial period, they gradually rise with the heat time increasing. There are 2 parts for entransy dissipation in the vacuum tube. The entransy dissipation of horizontal double collectors (from 0.2 to 1.8 m) is less than that of vertical single collector along the vacuum tube axis because the definite condition is to give heat flux boundary. The entransy dissipation of horizontal double collectors (from 0 to 0.2 m) is less than that of vertical single collector along the vacuum tube axis because the definite condition is constant temperature when hot water in vacuum tube flows into water tank and heat transfer occurs between hot and cold water. Enhancement of heat transfer effect of horizontal double collectors is better than that of vertical single collector, because its entransy increment is higher than that of vertical single collector and its entransy dissipation is better than that of vertical single collector. It is determined that the solar collectors with guide plate can be adopted in natural convection and the horizontal double collectors can be employed in forced convection in the thermal field of solar-assisted fuel cells with low and medium temperature.

SOLAR THERMAL PERFORMANCE OF ALL-GLASS EVACUATED COLLECTOR TUBES

Heat Transfer Performance Analysis on a PVT Collector Fabricated by Modifying a Commercial Solar Cell

Experiment and numerical simulation on flow and heat transfer in all-glass evacuated tube solar collectors

ANALYSIS OF THERMAL PERFORMANCE OF EVACUATED TUBULAR SOLAR AIR COLLECTOR WITH INSERTED TUBES

EXPERIMENTAL STUDY ON THERMAL LOSS OF SOLAR EVACUATED TUBE COLLECTOR

Experimental study on the heat dissipation performance of all-glass evacuated tube collector in winter night in cold areas

Testing on the Transient Heat Loss Coefficient of All-Glass Evacuated Tube Collectors in Severe Cold Areas

EXPERIMENTAL STUDY ON THERMAL PERFORMANCE OF EVACUATED TUBULAR SOLAR AIR COLLECTOR WITH INSERTED TUBES

The analysis and testing of thermal performance on solar evacuated tube

Experimental Analysis of Wet Gas-Liquid Water Mixture Within the Tank of Water in Glass Evacuated Tube Solar Water Heater

Experiment and simulation for convective heat transfer in all-glass evacuated tube solar collectors

Medium-temperature Solar Collectors with All-glass Solar Evacuated Tubes

PRESSURE MEASUREMENT AND RESIDUAL GAS ANALYSIS OF ALL-GLASS EVACUATED COLLECTOR TUBE

A TRANSIENT TEST METHOD FOR THERMAL PERFORMANCE OF FLAT-PLATE SOLAR COLLECTORS

Straight-through All-Glass Evacuated Tube Solar Collector for Low and Medium Temperature Applications

DYNAMIC HEAT TRANSFER CHARACTERISTICS OF PARABOLIC SOLAR TROUGH COLLECTORS

The Numerical Simulation Study on Influencing Factors in All-Glass Evacuated Tube Solar Water Heater

Thermal performance of two evacuated tube solar collectors with flat heat pipes

Experimental Study of Solar Air Heating System Based on Unglazed Transpired Collector

Study on the residual gas in all-glass evacuated collector tubes

Modeling and Performance Optimization of the U-pipe Glass Evacuated Tube Solar Collector