Abstract:Hot water production using solar collectors is the utmost comprehensive application of solar energy. Solar water heaters are still incapable of operating in night/off-weather conditions and lacking in thermal performance. Researchers can see heat storage (thermal battery backup) as a potential solution. The novelty of this study is the fabrication and testing of newly designed U-pipe-based vacuum tube collectors (VTCs) integrated with thermal energy storage. Furthermore, Stearic acid and PEG6000 were selected as phase change materials in this study, and collectors were operated in closed mode for specially designed cases. Also, a cost analysis was evaluated for these collectors to show their economic viability. The thermal performance and economic outcomes of storage-based collectors were compared with conventional collector. Measured experimental data encompassed instantaneous inlet and outlet water temperatures, solar radiation and ambient temperature. The empirical findings showed that the maximum daily thermal performances were 69.81, 68.34%, and 61.33% obtained by stearic acid-filled collector-2, followed by PEG-filled collector-3 and conventional collector-1 at .334 LPM for case-III, respectively. Moreover, the maximum energy enhancement ratio was 6.28% for collector-2 and 6.21% for collector-3 at .5 LPM for case-II, respectively. From the economic analysis results, it was observed that the modified solar water heaters (collector-2 and collector-3) have an average levelized water heating cost of .06885 /kWh, respectively, with a payback time of 5.37 and 5.15 years, which makes the modified collectors economically viable. Finally, the results indicate that the storage-based collectors can be used for applications with specific temperatures of hot water.

Heat Transfer Performance Analysis on a PVT Collector Fabricated by Modifying a Commercial Solar Cell

Design and Performance Research on Photovoltaic-Thermal(pvt)collcetors

Experimental Analysis of a Novel Solar PV/T Collector

Numerical Investigation of Innovative Photovoltaic–Thermal (PVT) Collector Designs for Electrical and Thermal Enhancement

Dynamic Performance Analysis of Photovoltaic–thermal Solar Collector with Dual Channels for Different Fluids

Experimental evaluation of photovoltaic thermal (PVT) system using a modular heat collector with flat back shape fins, pipe, nanofluids and phase change material

Hybrid photovoltaic and thermal solar-collector designed for natural circulation of water

A Hybrid Parabolic Trough Solar Collector System Integrated with Photovoltaics

Photovoltaic-Thermal Collector System for Domestic Application

Experimental & numerical investigation and optimization on a novel flat-plate PV/T system using CdfTe thin-film solar modules of sandwich structure

Hybrid Photovoltaic-Thermosyphon Water Heating System for Residential Application

EXPERIMENTAL INVESTIGATION ON A NOVEL SOLAR PHOTOVOLTAIC/THERMAL SYSTEM WITH FLAT ALUMINOUS BOX AS COLLECTOR

Modeling and Performance Optimization of the U-pipe Glass Evacuated Tube Solar Collector

Investigation on Thermal and Electrical Performance of Late-Model Plate-and-Tube in Water-Based PVT-PCM Collectors

Numerical Analysis of Photovoltaic-Thermal Collector Using Nanofluid As a Coolant

Trends and Outlooks on Heat Dissipating Performance of Collector

Numerical Simulation and Experimental Validation of Tri-Functional Photovoltaic/Thermal Solar Collector

Performance Analysis and Optimization of a Vapor-filled Flat-plate Solar Collector

Comparative thermal performance: An experimental study of self-stored U-pipe vacuum tube collectors operated in closed mode

Comparative Study of A Novel Heat Pipe Photovoltaic/Thermal Collector and A Water Thermosiphon Photovoltaic/Thermal Collector

Thermal performance of three concentrating collectors with bifacial PV cells. Part II – parametrical study