Abstract:High-precision and power-efficient sensor interfaces have become increasingly ubiquitous as they form an integral part of multiple fast-growing sectors such as instrumentation control, medical devices, and agricultural automation. Much progress has been recently made in direct-digitization sensor readout circuits (DD-RO). By skipping the instrumentation amplifier (IA) and connecting the ADC directly to the sensor, this architecture reduces system-level complexity compared to conventional IA plus ADC solutions. However, several challenges must be considered. First, in the absence of an IA, it requires a high dynamic range (>90dB) ADC to process the cross-scale input signals and disturbances spanning from several μV to hundreds of mV while retaining excellent sensitivity and linearity, which would usually entail excessive power dissipation. Such demanding DR can be relaxed by a spectrum-shaping $\Delta-\Delta\Sigma$ ADC [1] (Fig. 1). However, $\Delta-\Delta\Sigma$ ADCs are better suited to the spectral characteristic of bioelectrical signals and disturbances (electrode offset, power-line interference, and motion artifact), whose amplitudes decrease approximately with frequency. Second, conventional ADCs typically exhibit finite input impedance that hampers their direct interaction to high-impedance sensors due to the deterioration of total common-mode rejection ratio (T-CMRR) and gain accuracy. Prior art DD-ROs rely on a positive feedback loop (PFL) [2] or pre-charging buffers [3] for impedance boosting, but the former requires dedicated manual calibration while the latter suffers from additional noise, power, and area overhead. Alternatively, a $\Delta\Sigma$ ADC employing the $\mathrm{G}_{\mathrm{m}}-\mathrm{C}$ integrator provides high input impedance (Fig. 1 bottom left), and $\mathrm{G}_{\mathrm{m}}$ can be linearized by degeneration [2], [4]–[6] or fully differential transconductors embedded in current feedback [7] [8] (Fig. 1 bottom right). However, $\mathrm{G}_{\mathrm{m}}$ often dissipates more power to accommodate out-of-range input signals while retaining linearity.

An Extending Range for Data Acquisition and Its Implement

3.4 A 14b 98Hz-to-5.9khz 1.7-to-50.8 Μ W BW/Power Scalable Sensor Interface with a Dynamic Bandgap Reference and an Untrimmed Gain Error of ± 0.26 % from −40°C to 125°C

An 18-Bit High Performance Audio Sigma-Delta D/A Converter

A 14-B BW /power Scalable Sensor Interface with a Dynamic Bandgap Reference

Development of Temperature Collecting System Based on A/D Converter MAX1415

A Portable USB-port Multi-Mode Multi-channel A/D Data Acquisition System

A Data Acquisition Module Based on CompactRIO

An A/D Converting Technology with High Precision,Low Cost and Multiple Measuring Range

18-Bit A/D Converter AD7674 and Its Application

A Data Acquisition System in Intelligent Environmental Monitoring Device for Industrial Field

A Reconfigurable Data Acquisition Architecture Based on Hybrid Interleaving in Electronic Instrument

Long-distance Data Acquiring System with High Precision

Design of Data Acquisition System of Chromatograph Based on ADS1253

Design and Implementation of the A/D Conversion Circuit for the High-Accuracy Ultrasonic Flowmeter

Applications of Data Acquisition Based on A/D Converter and Least Square Method

Application of ARM I~2C Bus Interface Module in Data Acquisition

Towards a reliable approach on scaling in data acquisition

A 103.6Db-Sndr 760Mvpp-Input-range 7.8Gω-Input-impedance Direct-Digitization Sensor Readout with Pseudo-Differential Transconductors and Dummy DAC

A 1.6-Gsps High-Resolution Waveform Digitizer Based on a Time-Interleaved Technique

Measures increasiug the precision of the system in intelligent temperature measure and control.

A High-Quality Ratio-Metric Measurement Method Based on Analog-to-Digital Converter for Precision Sensors