Abstract:An incremental analog-to-digital converter (I-ADC) with chopper stabilization (CHS) and self-calibration techniques is presented to meet the requirements of high resolution,low power consumption and small area for measuring devices of ultra-low-frequency signals.The I-ADC has the function of reset operation to avoid pattern noise caused by ultra-low-frequency signals.A first-order architecture is adopted for the I-ADC to reduce power consumption and chip area,and to achieve 14-bit resolution by increasing certain conversion time.The chopper stabilization technique is employed to eliminate the influence of amplifier's low-frequency noise and offset on the I-ADC's precision,and power-on self-calibration is employed to eliminate the systematic offset of the I-ADC.The circuit of the I-ADC and the layout of the modulator are designed with the DongBu 0.5 μm BCD technology.Simulation results in an input range of -156.25～156.25 mV show that the maximum absolute conversion error of the I-ADC is 21 μV,the maximum errors of differential nonlinearity and integral nonlinearity are 0.12 and 0.21 bit,respectively,and the average current consumption of the modulator is only 20 μA.The modulator occupies a chip area of only 150 μm × 310 μm.The proposed I-ADC achieves 14 bit resolution,which is required by ultra-low-frequency signal measuring systems,such as lithiumion battery coulometer,and has significant advantages of low power consumption and small area.

A Data Acquisition Module Based on CompactRIO

A 14-bit 500MS/s and 1GS/s Configurable Pipelined ADC with Background Calibration

Implementation of distributed high precision real-time data acquisition system

A Portable USB-port Multi-Mode Multi-channel A/D Data Acquisition System

Design and calibration research of the data acquisition module based on VME bus

A Data Acquisition System in Intelligent Environmental Monitoring Device for Industrial Field

Data Acquisition and Analysis System of Large Frequency-converting Blower Based on NI CompactRIO

Implement of A/D Acquisition Module Based on PIC Microcontroller

Application of ARM I~2C Bus Interface Module in Data Acquisition

Data acquisition system based on LabVIEW for array sensors

The Design of Data Acquisition System Based on Virtual Instrument

Design of a Data Acquisition Module Based on PXI for Waveform Digitization

Design of Data Acquisition Module Based on VME Bus

Design of Wireless Static Calibration Data Acquisition System for Acceleration Sensor

Design of Signal Acquisition and Processing System Based on TMS320F2812 and LabVIEW for FAIMS

A Digital System Design of High-Speed Acquisition Module

Multifunctional Data Acquisition System Based on USB and FPGA

Design of Multi-channel Real-time Signal Acquisition System

An Extending Range for Data Acquisition and Its Implement

Incremental Analog-to-Digital Converter with High Resolution and Low Power for Measurement of Ultra-Low-Frequency Signals

DSP-Based,High-Precision Data Acquisition System with High-Speed External Extended FLASH