Abstract:Oxidation resistance of titanium aluminide (TiAl) based alloys is a fundamental aspect for the high-temperature structural applications such as in the advanced hypersonic aircraft engines and gas turbines. The aim of this study was to identify oxidation kinetics and mechanisms through detailed microstructural characterization of a newly-developed Ti-44Al-4Nb-1.5Cr-0.5Mo-0.1B-0.1Y alloy via focused ion beam (FIB), transmission electron microscopy (TEM), X-ray diffraction (XRD), electron probe microanalysis (EPMA), scanning transmission electron microscopy (STEM), along with density functional theory (DFT) calculations. The alloy consisting mainly of γ-TiAl/α2-Ti3Al lamellar structure exhibited a superior oxidation resistance at 700 °C, and followed parabolic oxidation kinetics at 800 °C and 900 °C. The observed multi-layered scale structure consisted of TiO2, Al2O3-rich, Al2O3+TiO2, H-Ti2AlN+Al2O3+α2-Ti3Al, Z-Ti5Al3O2+AlNb2+Laves-(Ti,Nb)Cr2, and H-Ti2AlN/α2-Ti3Al lamellae from the outside to inside after high-temperature oxidation. The γ-TiAl/α2-Ti3Al lamellae near the scale/substrate interface were first transformed into H-Ti2AlN/α2-Ti3Al lamellae, with orientation relationships identified as ( 0001 ) α 2 / / ( 0001 ) T i 2 A l N , ( 10 1 ¯ 0 ) α 2 / / ( 10 1 ¯ 0 ) T i 2 A l N and [ 1 2 ¯ 10 ] α 2 / / [ 1 2 ¯ 10 ] T i 2 A l N . The H-Ti2AlN/α2-Ti3Al lamellae were then transformed into a metastable Z-Ti5Al3O2 phase at the scale/substrate interface. The Z-phase was decomposed to Ti3Al and Al2O3 as the scale/substrate interface moved inwardly. Ti3Al reacted further with oxygen and nitrogen to form Ti2AlN, which was finally oxidized to form TiO2 and α-Al2O3. A Nb-rich layer was present beneath the scale along with the formation of AlNb2 and Laves phase, and the doping effect of Nb to suppress the diffusion of oxygen occurred mainly in the TiO2+Al2O3 compound layer. The results obtained in this study would pave the way for the development of advanced oxidation-resistant TiAl-based materials for high-temperature applications.

Surface Analyses of High-Temperature Oxidated TiAl-Based Alloys

Thermal Oxidation Behaviour of Ti6Al7Nb and Ti6Al4V Alloys

Surface Characterization of Thermally Oxidized Titanium Alloys

Surface Analyses of High-Temperature Oxidized in Situ Synthesized Ti-40Al-2.0C Composites

Interrupted Oxidation Kinetics of the Tial Alloys in Static Air

High Temperature Oxidation Behaviors of Powder Metallurgical Γ-Tial Based Alloys: Effects of Surface Defects on Morphology of the Oxide Scale

Two Influence Factors on Oxidation of TiAl

Microstructure and high temperature oxidation behaviour of Ti45Al8Nb0.5B0.2C alloy

OXIDATION MECHANISM OF BINARY Ti-Al ALLOYS AT ELEVATED TEMPERATURE

Research on Oxidation Behavior of Ti3Al Alloys at High Temperatures

High Temperature In-situ X-ray Diffraction Study of the Oxidation of the Ti3Al Based Alloys

Microstructure Evolution and Oxidation Mechanism of Ta5 Titanium Alloy During High-Temperature Heat Treatment

Non-Isothermal Oxidation Behaviors and Mechanisms of Ti-Al Intermetallic Compounds.

Oxidation behavior and effect of oxidation on microstructure and tensile properties of Ti-5Al-5Mo-5V-1Cr-1Fe alloy

Surface analysis of Ti-2A1-2.5Zr alloys oxidized at 300°C in alkaline water

Surface Analyses of High-Temperature Oxidized In-situ Synthesized Titanium Matrix Composites

Non-isothermal Oxidation Characteristic of Titanium-Aluminium Intermetallic Alloys

Microstructural evolution and high-temperature oxidation mechanisms of a titanium aluminide based alloy

Early oxidation behavior of Ti50Al and Ti45Al8Nb alloys

Time-Resolved In-Situ Xrd Study on Oxidation Evolution of Ti2alnb-Based Alloys

Oxidation Behavior of Near alpha-Titanium Alloy Ti60