Abstract:LSCF is a promising candidate for the cathode in SOFCs. Understanding the microstructural characteristics is crucial to its application because they predominately determine the performance and durability of the porous cathodes and hence of the SOFCs. To date little work has been reported on its mechanical properties and their correlation with the 3D microstructures. The main purpose of this research was to study the mechanical properties of both films and bulk samples, and to evaluate the effect of microstructural parameters, by means of both experimental and numerical methods. Room-temperature mechanical properties were investigated by nanoindentation. The elastic modulus of the bulk samples was found to increase from 33.8 to 174.3 GPa and hardness from 0.64 to 5.32 GPa as the porosity decreased from 0.45 to 0.05 after sintering at 900 to 1200C. It was shown that reliable measurements of the true properties of the films were obtained provided that the effects from both surface roughness and substrate were minimised to neglected levels within a certain range of indentation depth to film thickness ratio. The fracture toughnesses of bulk LSCF were determined to increase from 0.51 to 0.99 MPam0.5. The microstructures of films were characterised using FIB-SEM slice and view technique and the actual 3D microstructure models of the porous films were reconstructed based on the tomographic data obtained. Finite element modelling of the elastic modulus agreed well with the nanoindentation results. The 3D microstructures were numerically modified at constant porosity using cellular automaton method, so that the influence on elastic modulus of factors other than porosity could be evaluated. It was found that the heterogeneity of the pore structure has a significant influence on the elastic properties computed using mechanical simulation.

Preparation and characterization of porous lao.eSro-4Coo-4Feo.gOa-j ceramics

Preparation, Structure and Performance of La0.6Sr0.4Co0.2Fe0.8O3 Cathodes of Intermediate Temperature Solid Oxide Fuel Cells

Preparation and Characterization of Graded Cathode La0.6Sr0.4Co0.2Fe0.8O3−δ

Preparation And Characterization Of Graded Cathode La0.6sr0.4co0.2fe0.8o3-Delta

Preparation and electrical properties of pyrochlore R2(ZrTi)O7 for solid oxide fuel cell electrolyte

Manipulating Li2O atmosphere for sintering dense Li7La3Zr2O12 solid electrolyte

Sintering And Oxygen Permeation Studies Of La0.6sr0.4coo2fe0.8o3-Delta Ceramic Membranes With Improved Purity

Mechanical Properties of La0.6Sr0.4Co0.2Fe0.8O3-d Fuel Cell Electrodes

Characterization of one-step co-fired BaZr0.8Y0.2O3-δ-La2Ce2O7 composite electrolyte for low-temperature solid oxide fuel cells

A facial and effective way to prepare high-performance hetero-structured composite cathode for intermediate temperature solid oxide fuel cells

High performance La2NiO4+δ impregnated La0.6Sr0.4Co0.2Fe0.8O3-δ cathodes for solid oxide fuel cells

Carbon-enriched SiOC ceramics with hierarchical porous structure as anodes for lithium storage

Preparation And Characterization Of La0.9sr0.1ga0.8mg0.2o2.85-(Li/Na)(2)Co3 Composite Electrolytes

Enhanced oxygen reduction reaction of LaSrCoO4–Ce0.9Mn0.1O2 composite cathode for solid oxide fuel cells

A High Performance Interconnecting Ceramics for Solid Oxide Fuel Cells (Sofcs)

Preparation of Porous NiO-Ce0.8Sm0.2O1.9 Ceramics for Anode-supported Low-temperatureSolid Oxide Fuel Cells

Preparation and characterization of La1−xSrxNiyFe1−yO3−δ cathodes for low-temperature solid oxide fuel cells

Sintering and Oxygen Permeation Studies of La0.6Sr0.4Co0.2Fe0.8O3−δ Ceramic Membranes with Improved Purity

Fabrication and performance investigation of high entropy perovskite (Sr0.2Ba0.2Bi0.2La0.2Pr0.2)FeO3 IT-SOFC cathode material

Fabrication of LnBaCo2O5 +δ-La10Si6O27 Composite Cathode for Solid Oxide Fuel Cells

OPTIMIZATION OF SDE-(Li/Na)2CO3 COMPOSITE ELECTROLYTE FOR LOW-TEMPERATURE SOLID OXIDE FUEL CELL APPLICATIONS