Abstract:A major problem in membrane technology for applications such as wastewater treatment or desalination is often the loss of membrane permeability due to biofouling initiated froth protein adsorption and biofilm formation on the membrane surface. In this study, we developed a relatively simple and yet versatile approach to prepare polypropylene (PP) membrane with highly effective non-biofouling performance. Copolymer brushes were grafted to the surface of PP membrane through UV-induced polymerization of two oppositely charged monomers, i.e., [2-(methacryloyloxy)ethyl]trimethylammonium chloride (TM) and 3-sulfopropyl methacrylate potassium salt (SA), with varying TM:SA molar ratios. Surface analysis with scanning electron microscope (SEM) clearly showed the grafted copolymer brushes on the membrane surfaces and that with X-ray photoelectron spectroscope (XPS) revealed a similar TM:SA ratio of the grafted copolymer brushes to that of the monomer solution used for the polymerization. Water contact angle measurements indicated that the hydrophilicity of the membrane: surfaces was remarkably improved by the grafting of the TM/SA copolymer brushes, with the lowest water contact angle of 27 degrees being achieved at the TM:SA ratio of around 1:1. Experiments for antiprotein adsorption with bovine serum album (BSA) and lysozyme (LYZ) and antibiofilm formation with Escherichia coli (E. coli) demonstrated a great dependence of the membrane performance on the TM:SA ratios of the grafted copolymer brushes. It was found that the characteristics of the surface charges of the membrane surfaces played a very important role in the non-biofouling performance, and the membrane surface with balanced positive and negative charges showed the best non-biofouling performance for the proteins and bacteria tested in this study.

Surface Modification of Polysulfone Membranes by Low-Temperature Plasma-Graft Poly(ethylene Glycol) Onto Polysulfone Membranes

Surface immobilization of polymer brushes onto porous poly(vinylidene fluoride) membrane by electron beam to improve the hydrophilicity and fouling resistance

Improving the Hydrophilicity of Poly(vinylidene Fluoride) Porous Membranes by Electron Beam Initiated Surface Grafting of AA/SSS Binary Monomers

Improving Hydrophilicity And Protein Resistance Of Poly(Vinylidene Fluoride) Membranes By Blending With Amphiphilic Hyperbranched-Star Polymer

SURFACE MODIFICATION OF POLYSULFONE MEMBRANE BY LOW TEMPERATURE PLASMA TREATMENT

Surface modification of polysulfone hollow fiber membrane for extracorporeal membrane oxygenator using low-temperature plasma treatment

Surface Modification of Poly(tetrafluoroethylene) Films Via Plasma Treatment and Graft Copolymerization of Acrylic Acid

Surface Modification Of Microporous Polypropylene Membranes By Plasma-Induced Graft Polymerization Of Alpha-Allyl Glucoside

ENHANCING HYDROPHILICITY OF POLYSULFONE MEMBRANE SURFACE BY UV IRRADIATION OF DIFFERENT WAVELENGTHS AND BY PEG GRAFTING

Hydrophilic modification of a PSU membrane with block copolymer of PS-b-SBMA

Achieving highly effective non-biofouling performance for polypropylene membranes modified by UV-induced surface graft polymerization of two oppositely charged monomers.

Chemical modification of polysulfone membrane by polyethylene glycol for resisting drug adsorption and self-assembly of hepatocytes

Plasma Graft Polymerization and Surface-Initiated Atom Transfer Radical Polymerization: Characteristics of Low-Fouling Membranes Obtained by Surface Modification with Poly(2-methoxyethyl Acrylate)

Surface Modification of Polypropylene Microfiltration Membranes by the Immobilization of Poly(n-Vinyl-2-pyrrolidone): a Facile Plasma Approach

Surface Modification of Polyvinylidene Fluoride （PVDF） Membranes by Low-Temperature Plasma with Grafting Styrene

Modification of a Membrane Surface Charge by a Low Temperature Plasma Induced Grafting Reaction and Its Application to Reduce Membrane Fouling

Surface modification of a PVDF membrane by co‐grafting hydroxyl and zwitterionic polymers to enhance wettability and antifouling property

Polyethylene Glycol Acrylate-Grafted Polysulphone Membrane for Artificial Lungs: Plasma Modification and Haemocompatibility Improvement

Hemocompatibility and Oxygenation Performance of Polysulfone Membranes Grafted with Polyethylene Glycol and Heparin by Plasma-Induced Surface Modification

Controllable construction of zwitterionic polymer grafting modified polyvinylidene fluoride (PVDF) microfiltration membrane

Surface Modification of PVDF Membranes with Sulfobetaine Polymers for a Stably Anti‐protein‐fouling Performance