Abstract:To understand and further improve the corrosion resistance of a medium electroless phosphorus nickel coating (9 wt% P) under high-temperature and corrosive conditions, the microstructural evolution of the coating after various treatments, including thermal and mechanical methods (such as Hammer Peening), was extensively studied. Complementary analytical techniques, including SEM, EDS, in situ and ex situ XRD, and micro-indentation, were employed for detailed analysis. The transformation of the deposit from its amorphous state to a distinct structure comprising Ni, Ni 3 P, and NiO due to thermal treatment (ranging from 20 to 800 °C) was examined. The evolution of microstructure with temperature and annealing duration was discussed, correlating with alterations in mechanical properties, particularly micro-hardness. At temperatures exceeding 310 °C, a phase transition occurred, characterized by co-precipitation of Ni and Ni 3 P, leading to a significant change in the coating's mechanical behavior. With further temperature elevation, nickel diffused toward the surface, initiating NiO formation at 500 °C. The coating's oxidation behavior during isothermal treatment at varied temperatures (up to 800 °C) was also explored. This investigation was supported by thermodynamic calculations. Additionally, simplified kinetic simulations with the Dictra module from Thermo-Calc were proven to be able to reproduce the oxidation behavior. Hammer peening treatment enhanced the coating's hardness in its as-deposited state by introducing residual stresses that affected the precipitation kinetics during subsequent heat treatment. However, this hardening effect was no longer evident after the thermal treatment.

Structure Transformations and Property of Electroless Ni-B Coating

Microstructure and Property of Electroless Ni-B and Ni-Mo-B Coatings

Effect of heat-treatment on microstructure and property of electroless ni-b coating and ageing mechanism

AFM analysis on the surface of electroless Ni-B coating

Evolution of Microstructure and Mechanical Properties of Electroplated Nanocrystalline Ni–Co Coating During Heating

Structure and Property of Ni-W-B Alloy Electrodeposits Before and after Heat Treatment

INFLUENCE OF SURFACE MORPHOLOGY ON THE MICROHARDNESS OF ELECTROLEESS NI-B DEPOSIT REVEALED BY AFM OBSERVATION

Preparation and Properties of Textured Ni–W Coatings Electrodeposited on the Steel Surface from a Pyrophosphate Bath

In-depth investigation of the evolution of microstructure and its influence on the mechanical properties of medium-phosphorus electroless nickel coatings after thermomechanical treatments

Mechanical and Tribological Properties of Ni-B and Ni-B-W Coatings Prepared by Electroless Plating

The Structure and Properties of Electroless Ni–Mo–Cr–P Coatings on Copper Alloy

Coating process conditions of W alloy electrodeposition

Electrodeposition and Properties of an Amorphous Ni-W-B Alloy Before and after Heat Treatment

Structure and wear resistance of Ni-P-BNw electroless composite coating

Microstructure and wear properties of crystalline W alloy coatings prepared by electrodeposition

Microstructure and Crystallization Process of Electrodeposited Amorphous Ni-P Coatings

Electroless Ni–B Coating Formed from a Stabilizer-Free Double Bath

MICROSTRUCTURE AND PROPERTIES OF Ni - P COATING BY ELECTROLESS PLATING

Studies on structure of electroless Ni-P alloy

Wear and Corrosion Properties of Crystalline Ni-W Alloy Coatings Prepared by Electrodeposition

Hardness and tribological properties of co-electrodeposited Ni-W-B/B coatings