Abstract:Coatings can be created using various technologies and serve different roles, including protection, functionality, and decorative purposes. Among these technologies, electrodeposition has emerged as a low-cost, versatile, and straightforward process with remarkable scalability and manufacturability. Nickel, extensively studied in the context of electrodeposition, has many applications ranging from decorative to functional. The main objective of the present work is the electrodeposition of double-layer nickel coatings, consisting of a bright nickel pre-coating followed by a black nickel layer with enhanced properties, onto steel substrates. The influence of deposition parameters on colour, morphology, adhesion, roughness, and coefficient of friction was studied. The effects of cetyltrimethylammonium bromide (CTAB) and WS2 nanoparticles on the coatings’ properties and performance were also investigated. Additionally, the influence of the steel substrate’s pre-treatment, consisting of immersion in an HCl solution, prior to the electrodeposition, to etch the surface and activate it, was evaluated and optimized. The characterization of the pre-coating revealed a homogeneous surface with a medium superficial feature of 2.56 μm. Energy dispersive X-ray spectroscopy (EDS) results showed a high content of Ni, and X-ray diffraction (XRD) confirmed its crystallinity. In contrast, the black films’ characterization revealed their amorphous nature. The BN10 sample, which corresponds to a black nickel layer with a deposition time of 10 min, showed the best results for colour and roughness, presenting the lowest brightness (L*) value (closest to absolute black) and the most homogeneous roughness. EDS analysis confirmed the incorporation of WS2, but all samples with CTAB exhibited signs of corrosion and cracks, along with higher coefficient of friction (COF) values.

Electroless Ni–B Coating Formed from a Stabilizer-Free Double Bath

High Hardness and Wear Resistance Electroless Ni-P Deposits Without Heat Treatment

Hardness and tribological properties of co-electrodeposited Ni-W-B/B coatings

An insight into the role of boron content and heat treatment on the corrosion behaviour of Ni–B coatings

Influence of Annealing on the Microstructure and Mechanical Properties of Ni-W/Boron Composite Coatings

Effect of electroless deposition on the corrosion resistance property for NdFeB permanent magnets with surface coating of Ni-P alloy

Preparation of Cr Hard Coatings by Ion Beam Assisted Electron Beam Vapor Deposition on Ni and Cu Substrates

Properties of Ni-B/B Composite Coatings Produced by the Electroless Method under Semi-Technical Line Conditions

Optimization of Black Nickel Coatings’ Electrodeposit onto Steel

Enhancing NiCoB alloy coatings with hBN nanoparticles: exploring structural, mechanical, and corrosion improvements through pulse electrodeposition

A Low-Temperature Coating Method with H3BO3 for Enhanced Electrochemical Performance of Ni-rich LiNi0.82Co0.12Mn0.06O2 Cathode

Preparation and Properties of Electrodeposited Ni-B-Graphene Oxide Composite Coatings

Boronize Coatings Studied with a New Mass Transfer Model

Microstructural and Tribomechanical Characterization of NiB Coated 4150 Steel

Tribo-corrosion and mechanical performance of electro-deposited nano-composite h-BN/epoxy coating

Effect of addition of Pd on electrodeposited Ni–B coatings

Synthesis, Composition, Morphology, and Wettability of Electroless Ni-Fe-P Coatings with Varying Microstructures

Advancements in Nickel-Phosphate/Boron Based Electroless Composite Coatings: A Comprehensive Review of Mechanical Properties and Recent Developments

Effect of Amorphous Boron on the Microstructure and Corrosion Properties of Ni-W Coatings

Synthesis, structure characterization, and corrosion properties of duplex electroless Ni-P/Ni-B and Ni-P/Ni-B-W coatings on mild steel

Influence of ZrB2 Nanoparticles on Microstructure and Mechanical Properties of Ni-Co Coating