Abstract:High heat flux test facilities throughout the world performed transient heat loads testing to assess the efficiency and fatigue life of a variety of plasma-facing materials and design concepts. However, the penetration depth of the energetic particles is known to have a strong influence on the results of transient heating tests since the temperature is not in equilibrium when failures or significant events occur. Therefore we have developed a numerical approach to quantitatively investigate the thermal behavior in transient heat loads testing of plasma-facing materials. The approach is mainly based on the Monte Carlo method to simulate the trajectories of particles and the classical heat transfer model to calculate the temperature distribution inside a solid, which allows us to calculate the energy deposition distributions and the fraction of incident electron energy deposited (or the ratios of absorbed power density vs. the incident power density) in thermal materials for fusion reactor applications. In particular, the temperature distributions of plasma-facing materials of Be and W under different conditions (acceleration voltage, absorbed power density, duration time and category of material) are studied within this framework. The volumetric heating effect to the surface temperature of materials is much stronger for the low-Z materials like Be than for the high-Z materials like W, where the deviation of surface temperatures between different acceleration voltages can be up to 20% for low-Z materials. The framework of numerically simulating the mechanics for high heat flux testing of plasma-facing materials has been coded as the IRadMat package. (C) 2011 Elsevier B.V. All rights reserved.

Thermal shock investigation on solid cylinders subjected to rapid energy deposition

Elastic Stress Waves Of Cylindrical Rods Subjected To Rapid Energy Deposition

Experimental and Numerical Simulations of ELM-like Transient Damage Behaviors to Different Grade Tungsten and Tungsten Alloys

Study Of Thermal Stress Distribution On Thick Wall Cylinder By Thermal Shock Treatment

Thermo-mechanical Investigation of Composite High-Pressure Hydrogen Storage Cylinder During Fast Filling

Numerical simulation of the thermal-mechanical process of high current pulsed electron beam treatment

Study on X-ray Induced Two-Dimensional Thermal Shock Waves in Carbon/Phenolic

Analysis of thermal-mechanical coupling strength and fatigue life of cylinder head

Molecular Dynamics Simulation of Atomic Beam Bombardment on a Solid Surface

Theoretical Simulation of Thermal Behavior in Transient Heat Loads Testing of Plasma-Facing Materials

Study on Effects of Energy Deposition and Thermal Shock Wave by Electron Beam Irradiation

Temperature-Stress Fields And Related Phenomena Induced By A High Current Pulsed Electron Beam

Thermal Shock Resistance and Thermal Fracture of a Thermopiezoelectric Cylinder Based on Hyperbolic Heat Conduction

Transient Responses of a Hollow Cylinder under Thermal and Chemical Shock Based on Generalized Diffusion-Thermoelasticity with Memory-Dependent Derivative

Experimental and numerical study of circular, stainless thin tube energy absorber under axial impact by a control rod

Strength and Fatigue Analysis of Tube-Sheet Subjected to Thermal Shock

Multiphysics Simulations of Thermal Shock Testing of Nanofibrous High Power Targets

Dual-phase-lag Heat Conduction and Associate Fracture Mechanics of a Ceramic Fiber/matrix Composite Cylinder

Molecular Dynamics Simulation of Thermoelastic Coupling Characteristic for Low-Dimensional Nano-Rod under Thermal Shock

Numerical Simulation and Experimental Evidence for Surface Modification by High Current Pulsed Electron Beam

A Monolithic Solution Procedure for a Thermal Fluid-Structure Interaction System of Thermal Shock