Abstract:Two compositions Ce0.50Zr0.39La0.04Y0.07O2−δ and Ce0.25Zr0.65La0.04Y0.06O2−δ based on ceria-zirconia solid solutions were prepared as nanopowders using a continuous hydrothermal flow synthesis reactor, followed by either freeze-drying or hotplate-drying of the slurry. Each dried nanopowder was then subjected to 10h heat-treatment at 1000°C, 1100°C or 1200°C in air (to simulate accelerated ageing). The reducibility and hydrogen consumption of the oxidised samples were measured using temperature programmed reduction (TPR) up to 1000°C. The effects of composition, drying method and heat-treatment temperature were evaluated on the TPR profiles of the materials. The powders were further investigated using a range of analytical methods including UV/Vis spectroscopy (which yielded colour data), Raman spectroscopy, powder X-ray diffraction, BET surface area measurements and X-ray photoelectron spectroscopy (XPS). Chemometric methods were used to investigate relationships between the spectroscopic and total oxygen storage capacity (OSC) data. Principal component analysis (PCA) was used to provide a simple interpretation of the effects of various synthesis and treatment parameters on Raman spectra. Principal component regression (PCR) was used to build regression models relating the Raman spectra and the temperature of hydrogen consumption peak at several set temperatures in the TPR. The total hydrogen consumption of the materials was generally high, while the drying and heat-treatment conditions appeared to have a significant effect on the final properties of the resulting powders, such as the surface area and total oxygen storage capacity.

PREPARATION OF MONODISPERSED HYDROUS-ZIRCONIA NANOPARTICLES

Synthesis, Characterization and Application of Submicron ZrSiO4 Powder Via Sol-Gel-microemulsion-hydrothermal Method

Preparation of Nano-ZrO2 powder via a microwave-assisted hydrothermal method

Hydrothermal Synthesis and Characterization of Zirconia Nanocrystallites

Preparation and Self-assembly of Zirconia Nanoparticles Via Hydrothermal Method

Preparation of Zirconia Powders by Sol-gel Process

Synthesis and Characterization of Doped Nano-Sized Ceria–zirconia Solid Solutions

Preparation of dispersive zinc oxide nano-particles via hydrothermal modification route

Preparation and Properties of CaTiO_3:Zn Nanoparticles Based on Sol-Gel Method

Poly(vinyl Pyrrolidone)-Assisted Hydrothermal Synthesis of Pb(Zr0.52Ti0.48)O3 Nanocrystals

Preparation of Magnesium Stabilized Zirconia Nanoparticles by Buffer Solution Precipitation

Synthesis of Single-Crystalline Pb(Zr0.52Ti0.48)O-3 Nanocrystals by Hydrothermal Method

Effects of Precipitators and Surfactants on the Preparation of Zirconia Nanopowders via Solvothermal Method

Phase Composition Controllable Preparation of Zirconia Nanocrystals Via Solvothermal Method

Preparation of ZrO_2 Microspheres Under Microwave Radiation

Effect on Nanonmeter Zinc Oxide Powders Size under Sol Preparation Condition

Study on a new, environmentally benign method and its feasibility of preparing nanometer zirconia powder

Preparation of ZrO2 Nano-Particles by the Hydrolysis of ZrOCl2 Solution in the Reverse Micelles

Facile Synthesis and Characterization of ZrO₂ Nanoparticles via Modified Co-Precipitation Method

The Preparation,Stability of Zirconium Sol and Characteristics of ZrO_2 Powder

Optimization of the structure and morphology of monoclinic phase nanoscale zirconium dioxide