Abstract:A new method for the preparation of nano-zinc oxide was proposed for the effective use of zinc oxide dust (ZOD) containing complex impurities recycled and processed from local plants. Fe2+, Fe3+, Ca2+, Mg2+, Mn2+, Cu2+, and Pb2+, Sn4+, Al3+, Si4+, Bi3+ were selectively extracted from ZOD by alkaline leaching combined with precursor firing process. The effects of thermodynamic analysis of ZOD, Sodium hydroxide(NaOH) concentration(2–8 mol/L), leaching time (15–75 min), autothermal temperature of leaching reaction (43–70 °C), leaching liquid/solid ratio (L/S:5–25 mL/g), and pH were investigated during leaching process. Thermogravimetry-differential thermogravimetry (TG-DTG) analyses were carried out on Zinc carbonate hydroxide (Zn5(CO3)2(OH)6) precursor. In addition, the effects of calcination temperature(400–700 °C) and holding time (1.5–4.0 h) of precursors on average particle size of nano-ZnO were also studied. The results showed the leaching rate of Zn2+ reached 98.35% under the optimum conditions as: NaOH concentration of 6 mol/L, L/S of 20 mL/g, and leaching time of 60 min. Separation rates of Pb2+, Sn4+, Al3+, Si4+ reached 94.63%, 85.08%, 98.03%, 91.48%, respectively at pH = 5.5. Zn5 (CO3)2(OH)6 nano precursors were obtained at pH = 7–8. After the precursor of zinc carbonate was calcined at 400–600 °C for 2 h, high purity (99.53%) nano-zinc oxide was obtained with a particle size of 20 nm, a specific surface area of 23.84 m2/g, a porosity of 32.66%, and a zeta potential of −13.2 mV. This article provides an alternative new idea for the green and comprehensive utilization of industrial ZOD dusts with complex compositions.

Preparation of dispersive zinc oxide nano-particles via hydrothermal modification route

Preparation of ZnO nanoparticles using the direct precipitation method in a membrane dispersion micro-structured reactor

Preparation of Highly Dispersed and Small-Sized ZnO Nanoparticles in a Membrane Dispersion Microreactor and Their Photocatalytic Degradation

Formation of dispersive NiO nano-particles via hydrothermal modification

Preparation and Properties of CaTiO_3:Zn Nanoparticles Based on Sol-Gel Method

Hydrothermal synthesis of zinc oxide powders with different morphologies

Study on Preparation of Nano-ZnO by Zinc Hypoxide in Rotary Hearth Furnace

Preparation of nano-ZnO by direct precipitation method under ultrasonic radiation and surface modification study

Preparation of Nanometer Zinc Oxide Powders by Plasma Pyrolysis Technology and Their Applications.

Preparation of nano zinc oxide by alkaline treatment of industrial zinc oxide dust

Preparation and Photoluminescence of ZnO with Nanostructure by Hollow-Cathode Discharge

Preparation and characterization of nanocrystalline zinc oxide by a novel solvothermal oxidation route

Controllable Synthesis of Highly Dispersed Zno Nanoparticles and Nanorods

Supercritical hydrothermal synthesis of nano-zinc oxide: Process and mechanism

Preparation and Properties of Nanoparticles ZnS

Morphology Controlling and Optical Property of ZnO Prepared by Hydrothermal Method

Preparation and Modification of Nano-Zno/ceo2 Composite Oxides

Preparation of Mesoporous ZnO Microspheres Through a Membrane-Dispersion Microstructured Reactor and a Hydrothermal Treatment

Study on the Synthesis of Nano Zinc Oxide Particles under Supercritical Hydrothermal Conditions

Preparation of Nano-ZnO with Homogeneous Precipitation and Its Photocatalytic Properity

Hydrothermal Preparation of ZnO Nanorods Using Zinc Powder As Precursor and Their Characterization