Abstract:It is shown by differential scanning calorimetry (DSC) measurements that Lightly sulfonated polystyrene (SPS) is partially miscible with polysulfone (PSF), polycarbonate (PC), polyetherimide (PEI), and a thermotropic liquid crystalline polymer (LCP). Fourier transform infrared analysis confirms that the miscibility of SPS and PSF, and of SPS and PC, comes from the ion-dipole interaction between the sulfonate groups of SPS and the polar groups of PSF and PC, respectively. After the addition of SPS to LCP/PSF, LCP/PC, and LCP/PEI blends, this specific interaction leads to the compatibilization of SPS in these blends, which is revealed by inward glass transition temperature shifts of component polymers in DSC and dynamic mechanical analysis thermograms and by a much finer dispersion of the minor LCP phase in these matrix polymers. The utilization of SPS as the compatibilizer results in a stronger interfacial adhesion between LCP and matrix phases and improves the mechanical performances of LCP/PSF, LCP/PC, and LCP/PEI blends as well. Compared with ternary LCP/PSF, LCP/PC, and LCP/PEI blends with polystyrene as an inert third component, the ternary LCP/SPS/PSF, LCP/SPS/PC, and LCP/SPS/PEI blends have significantly enhanced tensile strengths and moduli, with acceptable processabilities at the same time. (C) 1998 John Wiley & Sons, Inc.

Tensile Properties Of Melt Blends Of Sulfonated Polystyrene Ionomers With Polystyrene.

Properties and morphology of poly(lactic acid)/soy protein isolate blends

Crystallization Behaviour Of Syndiotactic Polystyrene By Blending With Zinc Neutralized Sulfonated Polystyrene Ionomers.

Compatibilization by Sulfonate Ionomers in Polyblends with Thermotropic Liquid Crystalline Polymers

Synthesis and physical properties of sulfonated syndiotactic polystyrene ionomers

Blends of poly(methyl methacrylate) (PMMA) with PMMA ionomers: Mechanical properties

Brittle-to-Ductile Transition of Sulfonated Polystyrene Ionomers

The Morphology and Mechanical Properties of Sps/ipp Blends

Relationship between structure and properties in high-performance PA6/SEBS-g-MA/(PPO/PS) blends: The role of PPO and PS

Rheological Behavior of Oligomeric Ionomers

Properties of Polar SBS/PS Thermoplastic Elastomer Prepared by Blending Modification

PREPARATION AND PROPERTIES OF SULFONATED POLY(ARYLENE ETHER SULFONE)/SULFONATED POLYIMIDE BLEND PROTON EXCHANGE MEMBRANES

Morphology, thermal behavior, rheological, and mechanical properties of polypropylene/polystyrene blends based on elongation flow

Toughening of Polystyrene with Ethylene-Propylene-Diene Terpolymer(EPDM) Compatibilized by Styrene-Butadiene-Styrene Block Copolymer(SBS)

Polystyrene/High Density Polyethylene Blends Compatibilized by Tri-Block Copolymer II. Toughening and Deformation Mechanisms

Natural Rubber Blended with Polystyrene Nanoparticles Prepared by Differential Microemulsion Polymerization

THE COMPATIBILITY OF SYNDIOTACTIC POLYSTYRENE/ISOTACTIC POLYPROPYLENE/SYNDIOTACTIC POLYSTYRENE-b-POLY(1-BUTENE) BLENDS

Polystyrene/High Density Polyethylene Blends Compatibilized by a Tri-Block Copolymer I. Properties and Morphology

Effect of Compatibilizer Content on the Tensile Properties and Fracture Toughness of High Density Polyethylene/Polystyrene Blends

Mechanical properties and morphological structures relationship of blends based on sulfated EPDM ionomer and polypropylene

Research on Poly(lactic acid)/Poly(butylenes succinate) Blends