Abstract:Abstract Novel block copolymer ionomers having both carboxylate and sulfonate groups in the same polymer backbone were obtained by sulfonating maleated poly (styrene-(ethylene-co-butylene)-styrene) block copolymer (m-SEBS), followed by its neutralization with barium acetate. The effects of the degree of neutralization on the properties of the ionomers were studied. Infrared spectroscopic studies confirm the formation of both carboxylate and sulfonate salts and the occurrence of the sulfonation reaction in the para position of the benzene rings of polystyrene segments. Dynamic mechanical thermal analyses show the presence of a high temperature rubbery plateau, particularly at high degree of neutralization, in addition to the glass-rubber transitions due to the polystyrene (PS) and ethylene-butylene (EB) phases. Tg of the PS block remains unchanged and tanδ at the Tg gradually decreases with increasing the degree of neutralization. But Tg of the EB block gradually increases and tanδ at the Tg marginally increases. The decrease in tanδ at δ of the PS block is ascribed to the stiffening of the polystyrene segments on neutralization.Increase in the degree of neutralization causes formation of ionic crosslinks which increases the Tg of the EB block. Dielectric thermal analyses show that incorporation of ionic groups plays an important role in the temperature dependence of the dielectric constant of the ionomers. At lower degrees of neutralization (25 and 50%), the ionomers behave like the base polymer in the sense that dielectric constant increases at elevated temperature(>120°C). At higher degrees of neutralization, however, the increase in dielectric constant in the high temperature region is restricted due to the formation of the rubbery network arising out of the ionic aggregates. Transmission electron micrographs reveal that on neutralization the domain shape changes from predominantly cylindrical type to exclusively spherical one and at 100% neutralization the diameter of the spheres ranges from 15 to 20 nm. Processability studies show that as the degree of neutralization increases, the melt viscosity of the ionomers increases. The tensile strength, hardness, modulus and tear strength increase but the elongation at break and tension set decrease with increase in the degree of neutralization. Thermal stability of the polymers increases with the degree of neutralization. Reprocessability studies show that the ionomer can be recycled without fall in properties. The barium salt of sulfonated maleated SEBS at higher degrees of neutralization (75 and 100%) behaves as an ionic thermoplastic elastomer.

Rheological Behavior of Oligomeric Ionomers

Synthesis and physical properties of sulfonated syndiotactic polystyrene ionomers

Synthesis and Characterization of Poly (styrene‐co‐vinyl Phosphonate) Ionomers

Preparation and Association Behavior of Diblock Copolymer Ionomers Based on Poly(styrene-B-ethylene-co-propylene)

Viscoelastic properties of poly(styrene-co-vinylphosphonate) ionomers

Dynamic mechanical analysis of sulfonated polyurethane ionomers

Preparation of Polystyrene/Sio2 Composite Nanoparticles Bearing Sulfonic Groups on the Surface Via Emulsion Copolymerization Using A Polymerizable Emulsifier

Ion pairing controls rheological properties of "processionary" polyelectrolyte hydrogels

Polysiloxanes with Quaternary Ammonium and Polyether Groups for Silyl-Terminated Polypropylene Oxide Waterborne Emulsions

Viscometric Behavior of Disulfonated Poly(arylene Ether Sulfone) Random Copolymers Used As Proton Exchange Membranes

Blocky Sulfonation of Syndiotactic Polystyrene: A Facile Route toward Tailored Ionomer Architecture via Postpolymerization Functionalization in the Gel State

Hydration, Ion Distribution, and Ionic Network Formation in Sulfonated Poly(arylene ether sulfones)

Microstructures and Rheological Properties of Short-Side-Chain Perfluorosulfonic Acid in Water/2-Propanol

Nonmonotonic Influence of Size of Quaternary Ammonium Countercations on Micromorphology, Polarization, and Electroresponse of Anionic Poly(ionic Liquid)s.

Effect of Degree of Neutralization on the Properties of Ionic Thermoplastic Elastomer Based on Sulfonated Maleated Styrene-Ethylene/Butylene-Styrene Block Copolymer

Characterizing Styrene Monomer and Oligomers by SEC/MALS/VISC/DRI

Solid Polymer Electrolytes from Polyanionic Lithium Salts Based on the LiTFSI Anion Structure

A method for deriving oligomers from sulfamide monomer and their application as electrolytes

Complexation of SEBS-based ionomers with pyridine-unit-containing copolymers in solution and bulk

MEAN-SQUARE RADIUS OF GYRATION AND DIPOLE MOMENT OF POLY(METHYLPHENYLSILOXANE) CHAINS

Synthesis and Characterization of Model Polyether-Ester Ionomers