Abstract:Abstract Novel block copolymer ionomers having both carboxylate and sulfonate groups in the same polymer backbone were obtained by sulfonating maleated poly (styrene-(ethylene-co-butylene)-styrene) block copolymer (m-SEBS), followed by its neutralization with barium acetate. The effects of the degree of neutralization on the properties of the ionomers were studied. Infrared spectroscopic studies confirm the formation of both carboxylate and sulfonate salts and the occurrence of the sulfonation reaction in the para position of the benzene rings of polystyrene segments. Dynamic mechanical thermal analyses show the presence of a high temperature rubbery plateau, particularly at high degree of neutralization, in addition to the glass-rubber transitions due to the polystyrene (PS) and ethylene-butylene (EB) phases. Tg of the PS block remains unchanged and tanδ at the Tg gradually decreases with increasing the degree of neutralization. But Tg of the EB block gradually increases and tanδ at the Tg marginally increases. The decrease in tanδ at δ of the PS block is ascribed to the stiffening of the polystyrene segments on neutralization.Increase in the degree of neutralization causes formation of ionic crosslinks which increases the Tg of the EB block. Dielectric thermal analyses show that incorporation of ionic groups plays an important role in the temperature dependence of the dielectric constant of the ionomers. At lower degrees of neutralization (25 and 50%), the ionomers behave like the base polymer in the sense that dielectric constant increases at elevated temperature(>120°C). At higher degrees of neutralization, however, the increase in dielectric constant in the high temperature region is restricted due to the formation of the rubbery network arising out of the ionic aggregates. Transmission electron micrographs reveal that on neutralization the domain shape changes from predominantly cylindrical type to exclusively spherical one and at 100% neutralization the diameter of the spheres ranges from 15 to 20 nm. Processability studies show that as the degree of neutralization increases, the melt viscosity of the ionomers increases. The tensile strength, hardness, modulus and tear strength increase but the elongation at break and tension set decrease with increase in the degree of neutralization. Thermal stability of the polymers increases with the degree of neutralization. Reprocessability studies show that the ionomer can be recycled without fall in properties. The barium salt of sulfonated maleated SEBS at higher degrees of neutralization (75 and 100%) behaves as an ionic thermoplastic elastomer.

Effect of Degree of Neutralization on the Properties of Ionic Thermoplastic Elastomer Based on Sulfonated Maleated Styrene-Ethylene/Butylene-Styrene Block Copolymer

Effect Of Polyethersulfone On The Mechanical And Rheological Properties Of Polyetherimide-Modified Epoxy Systems

Impact of Metal Cations on the Thermal, Mechanical, and Rheological Properties of Telechelic Sulfonated Polyetherimides

Preparation and Association Behavior of Diblock Copolymer Ionomers Based on Poly(styrene-B-ethylene-co-propylene)

Synthesis and physical properties of sulfonated syndiotactic polystyrene ionomers

Effects of Monomer Polarity on Mma/Ba/Nama Emulsifier-Free Emulsion Copolymerization

Regulation of Physical Networks and Mechanical Properties of Triblock Thermoplastic Elastomer Through Introduction of Midblock Similar Crystalline Polymer with Multiblock Architecture

Synthesis and Characterization of Poly (styrene‐co‐vinyl Phosphonate) Ionomers

Anti-polyelectrolyte effect of zwitterions containing (meth)acrylic waterborne polymer chains as tool for colloidal stabilization and polymer reinforcement

Synthesis and Characterization of Model Polyether-Ester Ionomers

Rheological Behavior of Oligomeric Ionomers

Preparation of multi-temperature responsive elastomers by generating ionic networks in 1,2-polybutadiene using an anionic melting method

Complexation of SEBS-based ionomers with pyridine-unit-containing copolymers in solution and bulk

Synthesis and characterization of novel SEBS-g-MA/OMMT nanocomposites with thermal and mechanical resilience

Effect of succinonitrile on the structural, ion conductivity, and dielectric properties of PVDF‐HFP based solid polymer electrolytes

Fourier transform infrared studies of gel polymer electrolyte based on poly(acrylamide-co-acrylic acid) – Ethylene carbonate incorporated with water-soluble sodium sulfide

Influence of Processing History on Water and Salt Transport Properties of Disulfonated Polysulfone Random Copolymers

Association Behavior of Poly(methyl Methacrylate-Block-methacrylic Acid) in Aqueous Medium

Effects of Emulsification on Properties of Quaternary Ammonium Ion-Based Polyurethane Anionomer

An ABA triblock containing a central soft block of poly[2,5-di(n-hexogycarbonyl)styrene] and outer hard block of poly(4-vinylpyridine): synthesis, phase behavior and mechanical enhancement

Counterion Dynamics in Polyurethane-Carboxylate Ionomers with Ionic Liquid Counterions