Abstract:Aluminium silicon carbide (AlSiC) composites are silicon carbide (SiC) ceramic-reinforced aluminium matrix composites. When wide band-gap semiconductors, typically silicon carbide (SiC) and gallium nitride (GaN), work at high power density and high operating temperature, AlSiC is usually used as the thermal management material to dissipate a large amount of heat accumulated in the devices, thus reducing equipment failures caused by thermal runaway. Wetting is an important property to be considered because it can affect the heat transfer performance of AlSiC. The purpose of this work was to study the influence of 3 C-SiC crystalline orientation on the wetting behaviour of molten aluminum droplets through molecular dynamics simulation. The density distribution of Al droplets obtained on the (110) plane was stratified, while on the (111) plane, a relatively dense spindle region appeared. The physical quantities associated with the wettability of aluminium droplets on the (110) and (111) planes were also analysed. The contact angles on these two crystal planes obtained after fitting were 84.3° and 95.3°, respectively. The droplet exhibits a wetting state on the (110) plane while presenting characteristics between wetting and hydrophobicity on the (111) plane. The magnitude of the interface energy fluctuation of the (110) system was between − 17 kJ/mol and − 27 kJ/mol which was less than that of the (111) system. In the time step 2.85 × 10 5 fs before and after fitting, the average self-diffusion coefficients of aluminium droplets in the (111) system increased by 2.29 × 10 −8 and 1.9 × 10 −7 m 2 /s compared with those in the (110) system. Although it was more difficult for molten aluminium to diffuse on the (110) plane, it took longer time for the (111) system to reach stability. This further showed that the role of the 3 C-SiC crystalline orientation on droplet wettability cannot be ignored. Therefore, understanding the influence of crystal orientation on the wetting characteristics of AlSiC during its preparation is helpful for improving its heat transfer performance, and to ensure the reliable operation of wide band-gap semiconductor devices.

Crystallographic orientation relationship between SiC and Al in SiCp/Al-Si composites

Roles of orientation relationship and recrystallization in superplasticity of SiCw/6061Al composite

First-principle calculations on the structure of 6H-SiC/Al interface

Crystal Chemistry at Interfaces Between Liquid Al and Polar SiC{0001} Substrates

Interfacial Regulation and Fracture Mechanism of Al–Si/SiC Composites Infiltrated under Super-Gravity Field

First-principles study of interfaces in Al/SiC metal-matrix composite system

Orientation relationships and interfaces between NiAl and G-phase Ni16Hf6Si7

Influence of Reinforcement with Multimodal Distribution on Thermophysical Properties and Fracture Behavior in Al-Si/SiC Composites Infiltrated under Super-Gravity Field

Solidification and microstructure of ZA27/SiCp composite fabricated by mechanical-electromagnetic combination stirring process

Study of the 3C-SiC surface crystalline orientation effect on the wettability of molten aluminium droplets by molecular dynamics simulation

Structural Investigation of SiC/Al4C3 and SiC/TiC Interfaces Formed in the Brazing of Sic

Characterisation of interfacial bonding in Al2O3 coated SiC whisker reinforced TZP composites

Reinforcing Al matrix composites by novel intermetallic/SiC interface and transition structure

Mechanical and Electronic Properties of Al(111)/6H-SiC Interfaces: A DFT Study

Molecular Dynamics Study of Interfacial Micromechanical Behaviors of 6H-SiC/Al Composites under Uniaxial Tensile Deformation

A study on the orientation relationship between Ti3SiC2 and TiC grains

Electronic and mechanical properties of Al (100)/6H–SiC (0001) interfaces: a first-principles study

In-situ synthesis of nano SiC particles in Al–Si–C system at 750 °C

Interfacial Bonding of Al-Si/C Composites and Improvement of the Thermal Shock Resistance

Interfacial microstructure and sintering mechanism of plasma activated sintered Al/SiC composites

Microstructure Evolution and Mechanical Behaviors of SiCp/CNTs Hybrid Reinforced Al-Si-Cu-Mg Composite by Semi-solid Stir Casting