Abstract:The aromatic polyesters poly (MDP-IPC)/poly(EDP-IPC) from isophthaloyl chloride (IPC) and methyl/ethyl esters of diphenolic acid (MDP/EDP), which were made from reactions of diphenolic acid (DPA) and methanol/ethanol, were synthesized by interfacial polycondensation with tetrabutylammonium chloride (TBAC) as phase transfer catalyst. The reaction in various solvent/water systems was investigated. It was found that a large mass of capsules were formed at the beginning of the reaction for all solvents examined, and the reaction results depended on the solvents. It is believed that the capsule shells make up of the reaction zone, and a mechanism of the interfacial polycondensation is proposed accordingly. The effect of solvents on the reaction was interpreted based on the interaction between the polymer and the solvent according to the mechanism. The aromatic polyesters with higher yield (77%) and higher Intrinsic viscosity (0.66 dL/g) were obtained when dichloromethane was used as solvent. The effect of reaction conditions on the yield and intrinsic viscosity was investigated. It was found that the maximum intrinsic viscosity was reached when the molar radio of MDP to IPC was 1.1, and it was prone to gain polyesters with higher intrinsic viscosity and higher yield at higher concentration of monomers and higher reaction temperature. The thermal performance of the aromatic polyesters was studied by means of DSC and TGA. The glass transition temperature of poly(MDP-IPC) and poly(EDP-IPC) was 149.4 degrees C and 140.5 degrees C, respectively. The polyesters started to decompose at 300 degrees C in thermal gravimetric analysis. The results showed that the two polyesters were more heat-resistant and thermostable than the diphenolic acid aromatic polyesters.

TETRAHYDROFURAN POLYMERIZATION INITIATED\=WITH HETEROPOLYACID . REACTION BEHAVIOR OF ETHYLENE OXIDE

Tetrahydrofuran polymerization initiated by heteropolyacid in the presence of ethylene oxide: Reaction behavior of water and glycol

Studies on Mechanism of Tetrahydrofuran Polymerization Initiated by a Heteropolyacid

Ethylene Oxide Promoted Polymerization of Tetrahydrofuran Initiated with Low Concentration of Heteropolyacid

Effective promotion of tetrahydrofuran polymerization initiated with heteropolyacid

Polymerization of Tetrahydrofuran Initiated by Heteropolyacid in the Presence of Substituted Oxirane

Mechanistic Insights into Water-Mediated Tandem Catalysis of Metal-Coordination Co2/Epoxide Copolymerization and Organocatalytic Ring-Opening Polymerization: One-Pot, Two Steps, and Three Catalysis Cycles for Triblock Copolymers Synthesis

Tetrahydrofuran polymerizatiion initiated with heteropolyacid IV. Propylene oxide as promoter

Tetrahydrofuran Polymerization Initiated with Heteropolyacid Vi. Epichlorohydrin As Promoter

Activation of a Palladium-Based Catalyst by Hexafluoroisopropanol for Polyketone Synthesis Via Homogeneous Solution Polymerization

Control of Molecular Weight in Tetrahydrofuran Polymerization Initiated by Heteropolyacid

SYNTHESIS OF AROMATIC POLYESTERS FROM ESTERS OF DIPHENOLIC ACID AND ISOPHTHALOYL CHLORIDE BY INTERFACIAL POLYCONDENSATION

Synthesis of Aromatic Polyesters with Pendent Carboxyl Groups from Diphenolic Acid, Bisphenol a and Isophthaloyl Chloride by Interfacial Polycondensation

Synthesis of Ultrahigh-Molecular-weight Ethylene-1-hexene Copolymers with High Hexene Content Via Living Polymerization with Fluorinated Bis(phenoxy-Imine) Titanium(iv).

A STUDY ON POLYMERIZATION MECHANISM OF TETRAHYDROFURAN WITH THE CATALYSIS OF HETEROPOLYACID ACETICANHYDRIDE

Tetrahydrofuran polymerization intiated by heteropolyacid VII. Oxetane as promoter

EFFECT OF ETHYLENE GLYCOL ON POLYMERIZATION OF TETRAHYDROFURAN AND MOLECULAR WEIGHT OF PRODUCT

Preparation of Polyether Triol and Three-Armed Polyether Triol by Tetrahydrofuran Polymerization Initiated with Heteropolyacid

Synthesis and characterization of new type polytetrahydrofuran polyol

Tetrahydrofuran Polymerization Initiated with Heteropolyacid - V. Determination of Concentration of Propagating Species and Chain Propagation Rate Constant

PREPARATION OF POLYTETRAMETHYLENE GLYCOL BY BF3 SYSTEM