Abstract:ABSTRACT Objective: To optimize the patient dose and image quality through quality assurance (QA) of diagnostic x-ray equipment and to ensure compliance with international and national standards in x-ray specification parameters, the use of contactless and quick non-invasive instruments has gained importance. Considering the importance of equipment qualification and the intervention level for equipment management, it is vital to account for uncertainties in the measurement of parameters in diagnostic radiology. However, the limits and measurement uncertainties associated with the parameter measurement are not well established and many technical and scientific literature provide different tolerance values, either as absolute or in terms of percentage. Methods and Materials: In this paper, the authors analyze non-invasive multi-parameter detector measurements with the aim to (i) improve the accuracy in measurement of x-ray parameters (kilovoltage, dose, and exposure time); (ii) estimate the uncertainty associated with such measurements; (iii) analyze the tolerance values prescribed by various professional and regulatory bodies and propose an improvised method of reporting the parameters. The approach adopted in this paper takes into account the uncertainties associated with traditional instruments and the subjectivity in the measurements. Results: Estimated uncertainty for kV measurements in the range between 1.45 kV at 40 kV measurements and 4.88 kV at 150 kV measurements. The MU associated with the dose measurement is estimated to be 6.2% at 110 kVp, 100 mA, and 500 msec. Maximum MU estimated at 10 msec exposure time is 4.5% and with MU of 5% deviation added to 9.5%. Conclusions: The current practice of reporting the measured mean values deviation without considering the inherent measurement uncertainty may not be a correct quantification procedure in QA. This is evident from the case study that 3% addition to the measured kV, 6.2% addition in the measured dose, and 4.5% to the measured time accounts for measurement uncertainty.

IMPROVEMENT OF MEASUREMENT ACCURACY OF RTR SYSTEM

Improved Apparatus for Inline Measurement of Residence Time Distribution of Thermomechanically Complex Systems

Experimental study of particles trajectory in firing solid rocket motor with RTR technique part: (I) analysis of feasibility and experimental results

Study on Data Processing Method of High Precision Micro-tensile Stage

Study on Several Methods of Improving Precision of Test in the RCS Measurements

Infrared Radiation Measurement Based on Real-Time Correction

Research on the SR-CT Technique in Microstructures Testing During Dynamic Processes

Measurement Method of MTI Improvement Factor for Surveillance Radar

System design and experimental research on tip clearance measurement of areo-engines by digital radiograph

A Combination of Measuring Methods for ModuIation Transfer Characteristic of Proximity X-ray Imaging System

Uncertainty evaluation of non-invasive multi-parameter detector measurements in quality assurance of diagnostic radiology

The Dynamic Digital Radiography System Design and Data Calibration Method for Monitoring the Running Aero-Engine

Evaluation and improvement of acceleratior's flatness and symmetry by six sigma capability and control technology

Application of Real-Time Digitization Techniques in Beam Measurement for Accelerators

Measurement of Three-Dimensional Track Profiles on CR-39s Based on the Photometric Stereo Method.

Scanning parameter measurement and projected image correction for microfocus X-ray imaging system

Applications Of High-Speed Motion Analysis System On Solid Rocket Motor (Srm)

Automated Image System for Nuclear Track Counting and Measuring

Study on Measurement Method of Instantaneous Posture of Railway Vehicles

Measurement and Analysis of SNR of the 6MeV Industrial CT Detection System

Transfer Function Measurement for the SSRF SRF System