Abstract:With the source and detector kept stationary while an inspected object moves between them, straight-line-trajectory-based tomographic imaging (SLTTI) has the capability to provide both digital radiologic images and tomographic images simultaneously, at high speed and with low-cost equipment. It has a promising future for fast security inspection for air cargo examinations. In order to fully investigate the feasibility of this approach, an experimental SLTTI platform has been developed. In this work, the system design is first presented. Then, a hybrid image reconstruction algorithm is proposed to obtain high quality tomographic images from the system to solve the limited-angle problem it represents. In the proposed algorithm, an initial reconstruction using either a direct filtered-backprojection (FBP) -type algorithm or the linogram technique is followed by a Gerchberg-Papoulis (GP) extrapolation to compensate for missing data. The GP extrapolation is implemented by the linogram technique, and constrained by a total variation (TV) minimization. By taking advantage of the FBP, the linogram and the TV techniques, we establish a fast and stable iterative reconstruction for the SLTTI. Finally, numerical simulations and realistic experiments are given, through which our proposals are validated to be feasible and effective. In the numerical examples, our algorithm can reduce the reconstruction inaccuracies for both high contrast and low contrast objects by factors of more than 15 and can generate nearly artifact free images as if complete projection data were available. A realistic experiment on a CatPhan©600 phantom suggests that high quality tomographic images can be achieved from 120-deg of source fan-beam angle with undersampled data. For a group of explosive simulacra using 90 projection views over 120-deg of source fan-beam angle, the reconstruction inaccuracy can be reduced to lower than 4%.

Study Of Dynamic Data Acquisition And Processing In A Novel X-Ray Process Tomography System For Rapid Rotating Aero-Engine

Suppression of Artifacts Caused by Phase Errors and Noises in X-Ray Phase Computed Tomography

An Industrial CT System for Monitoring a Running Aero-Engine

The Dynamic Digital Radiography System Design and Data Calibration Method for Monitoring the Running Aero-Engine

Correct Block Artifacts by Differential Projection for A Dynamic Computed Tomography System

Application of Industrial CT System Based on Synchronous Triggering Method in Aero-engine In-situ Dynamic Detection

Preliminary study of rotary motion blurs in a novel industry CT imaging system

Optimization of Image Quality and Acquisition Time for Lab-Based X-ray Microtomography Using an Iterative Reconstruction Algorithm

X-Ray Digital Radiography Of Operating Aero-Engines With A Universal Trigger Module

Expected Value Correction-Based Computed Tomography for Airplane Engine

Straight-Line-Trajectory-Based X-Ray Tomographic Imaging for Security Inspections: System Design, Image Reconstruction and Preliminary Results

The realisation of fast X-ray computed tomography using a limited number of projection images for dimensional metrology

Correcting Hardening Artifacts of Aero-Engine Blades with an Iterative Linear Fitting Technique Framework

Consecutive Short-Scan CT for Geological Structure Analog Models with Large Size on In-Situ Stage.

System design and experimental research on tip clearance measurement of areo-engines by digital radiograph

A Block-Eliminating Method By Limited-View Scan In A Dynamic Ct System For Running Aero-Engine

An Interaction Based Ct Reconstruction Algorithm For Blocked Projection Data In A Dynamic Ict System

Motion Registration and Correction Based Iterative Reconstruction Method for Instant CT

Research on the SR-CT Technique in Microstructures Testing During Dynamic Processes

Preliminary Research on Laser Plasma Accelerator based Inverse Compton Scattering X-ray Imaging

Industrial computed tomography with real-time trajectory tracking