Abstract:The Li-rich cathode material for long cycle performance and long-term storage performance is a challenge for next-generation lithium-ion batteries due to the rapid capacity degradation over cycling and the formation of residual lithium on the surface during long-term storage. Herein, an elevated performance of Li1.2Mn0.54Ni0.13Co0.13O2 materials via CeO2 inlay is reported, which was prepared from Li1.2Mn0.54Ni0.13Co0.13O2 by sol-gel inlay with CeO2. It was proved by scanning electron microscopy, high-resolution transmission electron microscopy, X-ray diffraction and X-ray photoelectron spectroscopy that cerium oxide cladding not only covered the surface of the material but also diffused into the interior of the material change crystal structure. Cerium oxide on the cladding not only reduces the material's contact with water and carbon dioxide in the air, but also prevents the material from being corroded by electrolyte during electrochemical test. The position of the transition metal atom is replaced Ce atoms, which increases the unit cell volume and the stability of the Li-rich material during the cycling. The results show that the storage property and the electrochemical cycling property of the material have been improved obviously. The CeO2 inlaid lithium rich material discharged 204.6 mAh/g for the first time at the current of 1C, and 164.4 mAh/g after 150 charge and discharge cycles with corresponding capacity retention rate of 80.35%, compared with the retention rate of 57.26% for pristine Li-rich material capacity. After being stored in humid air for 40 days, the CeO2 inlaid lithium-rich material showed better electrochemical performance than the pristine one. It is powerfully demonstrated that the CeO2 inlay strategy here holds huge promise for surface modification of electrode materials for lithium-ion batteries.

Ceo2 Thin Film As A Lithium-Ion-Storage Material Fabricated by Pulsed Laser Deposition

A nanocrystalline Co3O4 thin film electrode for Li-ion batteries

Robust Strategy for Crafting Li5cr7ti6o25@Ceo2 Composites As High-Performance Anode Material for Lithium-Ion Battery

Licoo2 Thin Film Cathode Fabricated by Pulsed Laser Deposition

Improved lithium storage performance of CeO2-decorated SrLi2Ti6O14 material as an anode for Li-ion battery

Cerium fluoride coated layered oxide Li 1.2 Mn 0.54 Ni 0.13 Co 0.13 O 2 as cathode materials with improved electrochemical performance for lithium ion batteries

Cobalt Ferrite Thin Films As Anode Material for Lithium Ion Batteries

Unexpected Li2o2 Film Growth on Carbon Nanotube Electrodes with Ceo2 Nanoparticles in Li-O-2 Batteries

High-capacity LiV3O8 Thin-Film Cathode with a Mixed Amorphous–nanocrystalline Microstructure Prepared by RF Magnetron Sputtering

Spherical CeO 2 synthesized by molten-salt with unique fast variable valence properties for lithium-ion battery anode

Preparation and Electrochemical Properties of Li4Ti5O12 Thin Film Electrodes by Pulsed Laser Deposition

CeO2 Coating to Improve the Performance of Li[Li0.2Mn0.54Ni0.13Co0.13]O2

A Nanocrystalline Nio Thin-Film Electrode Prepared by Pulsed Laser Ablation for Li-Ion Batteries

Excellent Electrochemical Performance and Thermal Stability of LiNi<sub>0.5</sub>Mn<sub>1.5</sub>O<sub>4</sub> Thin-Film Cathode Prepared by Pulsed Laser Deposition

Cerium Oxides As Oxygen Reduction Catalysts For Lithium-Air Batteries

High Power and Capacity of Lini0.5mn1.5o4 Thin Films Cathodes Prepared by Pulsed Laser Deposition

Electrochemical Properties of MnF_2 Films Fabricated by Pulsed Laser Deposition

Improved Cycling Performance of CeO2-inlaid Li-rich Cathode Materials for Lithium-Ion Battery

All-Solid-State Thin Film Lithium Batteries With Licoo2 Cathodes

Evaluation of Pulsed Laser Deposited Li<sub>4</sub>Ti<sub>5</sub>O<sub>12 </sub> Thin Film Anodes by CV and EIS

Preparation of CeO2-coated Li1.2Mn0.54Co0.13Ni0.13O2 as cathode materials for Lithium Ion Batteries