Abstract:A magnesium–aluminum-layered double hydroxide (Mg-Al LDH) with a nano-lamellar morphology was prepared by using a homogeneous precipitation and hydrothermal method, and a calcination product (Mg-Al LDO) of the Mg-Al LDH was also obtained in this work. The XRD, TEM, SEM, FTIR, N2 ad/desorption, and TG-DTG techniques were employed to characterize the microstructures, morphologies, and thermostability levels of these two materials in detail. The results showed that both the Mg-Al LDH and Mg-Al LDO had mesoporous structures and nanoplate morphologies, with diameters of 50~200 nm. The Mg-Al LDH was transformed into Mg-Al LDO at 773 K in an air atmosphere. The adsorption properties of the Mg-Al LDH were investigated systematically with a copper chloride solution as a simulated waste. The experimental results demonstrated that the pH value of the solution had an obvious influence on its Cu2+ adsorption capacity, and the optimal pH value was approximately 5.0. The adsorption kinetics results showed that the Mg-Al LDH had a rapid adsorption rate, and the equilibrium adsorption capacity was 62.11 mg/g. Additionally, the Cu2+ adsorption could be commendably described using a pseudo-second-order model, demonstrating that the adsorption behavior is regulated by chemical sorption. The adsorption thermodynamic results indicated that the adsorption process was spontaneous at temperatures above 318 K. Moreover, the ΔG0 values decreased as the temperature was raised, which indicated that a higher temperature can cause a greater impetus for Cu2+adsorption. In addition, the positive values of the ΔH0 indicated that the Cu2+ adsorption was endothermic, and the positive ΔS0 values revealed an increase in the confusion at the solid–liquid interface of the adsorbent.

THE SYNTHESIS AND CHARACTERIZATION OF CARBONATE PILLARED Co-Al HYDROTALCITE-LIKE COMPOUND

Pillared hydrotalcite produced by calcine-recovering method and its structure characterization.

A novel method for synthesis of Co–Al layered double hydroxides and their conversions to mesoporous CoAl 2 O 4 nanostructures for applications in adsorption removal of fluoride ions

Synthesis and Characterization of the Mixed Mg/Al Hydrotalcite‐Like Compounds

Efficient synthesis of Co 2+ –Co 3+ hydrotalcite-like compounds via NaOH precipitation in methanol–water under mild alkaline conditions

Synthesis of Nano-Alumina Hydroxide Sol Using Sol-gel Method

Influence of cations (Li+, Na+, K+)for synthesis mesoporous molecular sieve MCM-41 and their properties

Effect of coprecipitation method on Mg–Al hydrotalcite properties: application in the synthesis of diethylene glycol di-(methyl carbonate)

Synthesis, Characterization and Growth Mechanism of Hierarchical Cantaloupe-Like Alooh Superstructures by A Simple Hydrothermal Process

Preparation,Characterization and Surface Acidity of Hydroxy-Fe-Al Pillared Clays Containing Mixed-matal Complexes(II)

Poly(acrylic acid)/Hydrotalcite Nanocomposite Hydrogels:Preparation,and Preliminary Immobilization Studies of Carbonic Anhydrase

STUDY ON ADSORPTION PROCESS CONDITIONS OF CARBON DIOXIDE OF POTASSIUM CARBONATE MODIFIED HYDROTALCITE

Influence of pH on crystal form of aluminum hydroxide

Structure and Base Properties of Calcined Hydrotalcites

Synthesis and Characterization of Intercalation Assembled Supermolecular Structure Anion Pillared Hydrotalcites

Influence of pH Value on Crystal Structure and Microstructure of Aluminum Hydroxide

Facile Preparation of Porous CaMgAl Hydrotalcite-Like Derived Mixed Oxides through Alkaline Etching of KOH for CO2 Capture

Synthesis and Characterization of Calcium Sulfoaluminate Hydrates—Ettringite (AFt) and Monosulfate (AFm)

Studies on Synthesis, Characterization and Catalytic Behavior of Hydrotalcite Pillared with Peroxoheteropolyanions

Study of the Effects on Synthesis Mg-Al-hydrotalcite-like Compounds

Synthesis of High-Crystallinity Mg-Al Hydrotalcite with a Nanoflake Morphology and Its Adsorption Properties for Cu2+ from an Aqueous Solution