Abstract:A static total pressure method was employed to determine the vapor pressures of pure propyl ethanoate (propyl acetate), pure ethanoic acid, and the corresponding propyl acetate + ethanoic acid binary system at different feeding compositions over the temperature range (323.15 to 353.15) K. The isothermal vapor−liquid equilibrium (VLE) data of the binary mixture at various temperatures were obtained from classical thermodynamic relations and mass-balance equations. The nonrandom two-liquid (NRTL), Wilson, and universal quasi-chemical (UNIQUAC) models were used to represent the nonideality of the liquid phase, and a modified Peng−Robinson equation of state was used to compute the properties of the vapor phase. The overall average relative deviations between the experimental equilibrium pressures and the NRTL, Wilson, and UNIQUAC models were (0.95, 0.96, and 0.94) %, respectively. The three models gave about the same equilibrium pressures and vapor compositions. A new version of the conductor-like screening model−segment activity coefficient (COSMO−SAC) model was applied to predict the VLE of propyl acetate + ethanoic acid mixtures, and good agreement with the experimental data was obtained.

Measurement of partial vapor-liquid equilibria of binary systems for making vinyl acetate from cracking ethylidene diacetate

Liquid−Liquid Equilibria for the Ternary System Water + Acetic Acid + Propyl Acetate

Liquid−Liquid Equilibria for the Acetic Acid + Water + Amyl Acetate and Acetic Acid + Water + 2-Methyl Ethyl Acetate Ternary Systems

Vapor–liquid equilibria for water + acetic acid + (N,N-dimethylformamide or dimethyl sulfoxide) at 13.33 kPa

Liquid−Liquid Equilibria for the Ternary Systems Acetic Acid + Water + Butyl Acetate and Acetic Acid + Water + 2-Methyl Propyl Acetate at 304.15 K, 332.15 K, and 366.15 K

Isobaric Vapor-Liquid Equilibrium for Acetic Acid+dimethyl Sulfoxide

FT-IR spectroscopy combined with DFT calculation to explore solvent effects of vinyl acetate.

Measurement of Vapor Liquid Equilibrium for System of Ethyl Acetate-Pyridine at Different Pressures

Isobaric vapor-liquid equilibrium of acetic acid-N, N-dimethylformamide system

Isobaric Vapor–Liquid Equilibria for Water + Acetic Acid + 1-Ethyl-3-methylimidazolium Diethylphosphate at 101.32 Kpa

The study of vapor liquid equilibrium for cyclopropyl amine-methanol

Isobaric Vapor-Liquid Equilibrium of Binary Systems: P-Xylene + (acetic Acid, Methyl Acetate and N-Propyl Acetate) and Methyl Acetate + N-Propyl Acetate in an Acetic Acid Dehydration Process

Isobaric Vapor Liquid Equilibrium of Binary Systems: p Xylene plus (Acetic Acid, Methyl Acetate and n Propyl Acetate) and Methyl Acetate plus n Propyl Acetate in an Acetic Acid …

Study on the measurement of VLE data by self-section high pressure equilibrium tank

Vapor−Liquid Equilibria in the Propyl Acetate + Ethanoic Acid Binary System from (323.15 to 353.15) K: Measurement with a Static Method and Modeling with the NRTL, Wilson, UNIQUAC, and COSMO−SAC Approaches

MEASUREMENTS AND THERMODYNAMIC MODELING OF VAPOR-LIQUID EQUILIBRIA FOR BINARY SYSTEMS OF ISOPROPYL CHLOROACETATE WITH CYCLOHEXANE, ISOPROPANOL AND BENZENE AT 101.3 kPa

Reply to “comments on ‘isobaric Vapor + Liquid Equilibrium Measurements and Calculations for Using Nontraditional Models for the Association Systems of Ethyl Acetate +2-Ethylhexanoic Acid and Propyl Acetate +2-Ethylhexanoic Acid at Atmospheric Pressure’″

Isobaric Vapor−Liquid Equilibria for Binary Systems of Acetic Acid + Benzene, Chloroacetic Acid + Benzene, and Dichloroacetic Acid + Benzene at 101.33 Kpa

Vapor−Liquid Equilibria for the Quaternary System Ethanol + Acetone + Benzene + Hexane

Vapor–liquid Equilibria for the Binary Mixtures of 2,3-Butanediol with N-Butanol, N-Butyl Acetate, and Ethyl Acetate at 101.3 Kpa

Isobaric Vapour-Liquid Equilibrium for Binary and Ternary Systems of Isopropyl Acetate, Isopropyl Alcohol, Acetic Acid and Water at 101.3 Kpa