Abstract:For calculating the vapor-liquid equilibrium of acetic acid-water system, deviations usually become the key factors affecting the accuracy of computed results. The non-ideal behavior in the vapor and liquid phase must be taken into account even at a low pressure. The earlier method to calculate vapor phase fugacity is by the "The Chemical Theory" and is proved to be more accurate, but very much complicated in programming the computing process. In this work, "The Chemical Equilibrium Theory" (CET) is introduced to replace "The Chemical Theory" to account for nonideality in the vapor phase. The content of this method is to regard association of acetic acid molecules as a process of equilibrium reaction, in which equilibrium constants K can be defined and determined by experiments. Because of the association in the vapor phase, new species will be formed such as dimers, trimers etc. They can be treated as individual components in vapor phase, while monomers in liquid phase only. The non-ideality in the liquid phase including association can be lumped into the two activity coefficients of acetic acid and water, which can be calculated by some thermodynamic models such as Wilson equations. Through the above-stated treatment, not only a result is achieved in good agreement with the experiment, but also indicates the computing process in quite a simple and rapid way. On the basis of above study the distillation process of acetic acid and water system is investigated by mathematical simulation and experiments. The mathematical model in the simulation is resolved by the conventional methed. For separating a known mixture in given specifications, reflux ratio, feeding position and other operating variables as well as their ralationships are predicted. The theoretical results for the distillation process are also compared with those from software such as Hysim, Design II, etc. and the experimental data from a distillation. The resutts show that the needed theoretical stages calculated by using the "CET" method for separating the mixture of acetic acid-water at a certain reflux ratio, in a given feeding composition and specifications, are about 30% more than those from Hysim and Design II. This is basically identical to the data from the distillation test.

Isobaric Vapor-Liquid Equilibrium for Acetic Acid+dimethyl Sulfoxide

Vapor–liquid equilibria for water + acetic acid + (N,N-dimethylformamide or dimethyl sulfoxide) at 13.33 kPa

Isobaric vapor-liquid equilibrium of acetic acid-N, N-dimethylformamide system

Isobaric Vapor–Liquid Equilibria for Water + Acetic Acid + 1-Ethyl-3-methylimidazolium Diethylphosphate at 101.32 Kpa

Liquid−Liquid Equilibria for the Ternary System Water + Acetic Acid + Propyl Acetate

Liquid−Liquid Equilibria for the Acetic Acid + Water + Amyl Acetate and Acetic Acid + Water + 2-Methyl Ethyl Acetate Ternary Systems

Liquid−Liquid Equilibria for the Ternary Systems Acetic Acid + Water + Butyl Acetate and Acetic Acid + Water + 2-Methyl Propyl Acetate at 304.15 K, 332.15 K, and 366.15 K

THERMODYNAMIC CONSISTENCY FOR THE VAPOR-LIQUID EQUILIBRIUM DATA OF ASSOCIATING SYSTEM

Isothermal Vapor-Liquid Equilibrium of Binary Mixture (1，1，1，2-Tetrafluoroethane+DME) at Temperature Range From (253.15 to 273.15) K

Isothermal Vapor–Liquid Equilibrium of the Absorption Working Pairs (HFC-32 + DMETrEG, HFC-32 + NMP) at Temperatures from 293.15 to 343.15 K

Isobaric Vapour-Liquid Equilibrium for Binary and Ternary Systems of Isopropyl Acetate, Isopropyl Alcohol, Acetic Acid and Water at 101.3 Kpa

Vapor liquid equilibrium of absorption working pair R152a+DMETrEG

Isobaric Vapor-Liquid Equilibrium Data for Tetrahydrofuran + Acetic Acid and Tetrahydrofuran + Trichloroethylene Mixtures

Isobaric vapor-liquid equilibria for water-formic-acid-N-methylpyrrolidone

Isobaric Vapor–Liquid Equilibrium for Binary Systems of n -Butyric Acid with Water, Isopropyl Acetate, n -Propyl Acetate, and n -Methylpyrrolidone

The vapor-liquid equilibrium of acetic acid-water system and its simulation of the distillation process

Experimental Data and Thermodynamic Modeling of Liquid–Liquid Equilibrium for Valeric Acid Extraction from Aqueous Solutions with Methyl Ethyl Ketone and Methyl Isobutyl Ketone at Several Temperatures

Vapor–liquid Equilibrium for Binary and Ternary Systems of Tetrahydrofuran, Ethyl Acetate and N-methyl Pyrrolidone at Pressure 101.3 Kpa

MEASUREMENTS AND THERMODYNAMIC MODELING OF VAPOR-LIQUID EQUILIBRIA FOR BINARY SYSTEMS OF ISOPROPYL CHLOROACETATE WITH CYCLOHEXANE, ISOPROPANOL AND BENZENE AT 101.3 kPa

Isobaric vapour-liquid equilibrium for systems of methyl chloroacetate, methyl dichloroacetate and methyl 2-chloropropionate at 101.33 kPa

Thermodynamic analysis and azeotropic distillation simulation for acetic acid-water-butyl acetate system