Study on the High Temperature Tribological Properties of Ni-Cr Based Alloys Containing MoS2

DS Xiong,CQ Peng,QZ Huang
DOI: https://doi.org/10.3321/j.issn:1004-0595.1999.04.006
IF: 3.752
1998-01-01
Transactions of Nonferrous Metals Society of China
Abstract:B- and MoS2-containing Ni-Cr based self-lubricating materials were prepared by P/M hot-pressing the mixture of alloyed Ni-Cr powder, elemental Mo and B powders and MoS2 powder. The phase constituents were analysed using an X-ray diffractometer, and the hardness was measured using a Brinell's machine. The friction coefficients and wear rates of the studied materials were determined by means of pin-on-disc tribometer. The results showed that the studied materials are mainly composed of Ni-based solid solution, Cr3S4 and MoB; the wear debris are mainly composed of NiO, CrO, xNiO . MoO3. yH(2)O, Cr2O3 and nickel-based solid solution at 700 degrees C; the Ni-Cr-Mo-B-4MoS(2) alloy has the best tribological properties, over a wide range of temperature from 20 degrees C to 700 degrees C, its friction coefficient is 0.14 similar to 0.26 and its wear rate is 1.6 x 10(-14 )similar to 1.2 x 10(-13) m(3)/N.m.
What problem does this paper attempt to address?