Abstract:Polyether-ether-ketone (PEEK) and polyimide (PI) are two kinds of engineering polymer materials widely used as roller bearing cages and rings under extreme environment because of their noise reduction and corrosion resistance properties. The Si3N4 ceramic is the most common ball bearing material. Many current engineering applications of ball bearings require aqueous lubrication. Therefore, this study presents the aqueous lubrication of tribopairs formed by PEEK and PI material sliding against Si3N4 ceramic. Experimental results show that two tribopairs exhibited the similar tribological properties under the dry condition. Water as a lubricant for the PI–Si3N4 tribopair pairs effectively reduces both friction coefficients by 35.5% and wear rates by 32%. The water absorption of PI induces better tribological properties by changing the tribopair surface properties. In addition, the dimples appearing on the PI tribopair surface under water generate additional hydrodynamic lubrication and further improve the friction properties of surface. The PEEK–Si3N4 tribopair shows similar friction coefficients under two kinds of environments. The wear rates under water are approximately more than two times of that under dry sliding. However, water inhibits the appearance of the crush phenomenon and enhances the carrying capacity of the tribopair. Energy dispersive spectroscopy and X-ray diffraction spectra demonstrate no chemical corrosion. The 3D profiler and SEM morphologies illustrate that the transfer film would be formed from the surface of PEEK under water but hindered under dry friction. Overall, the PI–Si3N4 tribopair exhibits better properties than PEEK under water and is promising for future applications in the bearing industry.

Investigation on bio-tribological properties of UHMWPE-SiC ceramic pair

Biological Friction Properties and Mechanism of Uhmwpe-Sic Ceramics Friction Pair

Friction and Wear of Self-Mated SiC and Si 3 N 4 in Green Water-Based Lubricant

Wear Behaviour and Microstructural Changes of SiCw-Al Composite under Unlubricated Sliding Friction

Friction and Wear Properties of Si3N4 and SiC Used for Water-Lubricated Sliding Bearings

Tribological behavior of modified polyetheretherketone composites in sliding against stainless steel under water lubrication

Tribological properties of kaolin filled UHMWPE composites in unlubricated sliding

Tribological Properties of Si-Doped Graphite-Like Amorphous Carbon Film of PEEK Rubbing with Different Counterparts in SBF Medium

Basic Bio-Tribological Performance of Insulating Si3N4-Based Ceramic as Human Body Replacement Joints

Tribological Properties of Ion Implanted UHMWPE Against Si3N4 under Different Lubrication Conditions

Aqueous lubrication and surface microstructures of engineering polymer materials (PEEK and PI) when sliding against Si3N4

Tribological behavior of various ceramic materials sliding against CF/PTFE/graphite-filled PEEK under seawater lubrication

An Investigation of the Bio-tribological Performance of Diamond-like Carbon/Ultrahigh Molecular Weight Polyethylene Couple.

Low-friction Mechanism of Silicon Carbide and Cemented Carbide in Water

Comparison of the bio-tribological properties of UHMWPE-Chirulen® and PEEK-OPTIMA® articulating against ceramics: Implications for orthopedic implants

Friction and wear properties of hydraulic components with ceramic/steel-to-steel pairs

Tribological Behavior of Liquid Phase Sintered SiC Ceramics Under Dry Condition

Friction and wear performance of CrSiBCN coatings sliding against ceramic and metal counterparts in sea water

Enhancement of Tribological Properties in Siliconized Graphite Via Hierarchically Hybrid SiC/C Composite

In-situ friction and wear study of SiCα/SiCβ and Al2O3-TiC-Co composite ceramics

Outstanding self-lubrication of SiC ceramic with porous surface/AlCoCrFeNiTi0.5 high-entropy alloy tribol-pair under 90 wt% H2O2 harsh environment