Abstract:Ultra-low-wear polyethylene (ULWPE) is a new metallocene catalyzed high density polyethylene (HDPE)material. Previous studies have demonstrated that it has excellent biocompatibility and wear resistance, whereupon indicating great potential in the applications to artificial joints. However, as a newly developed material, its tribological behavior and wear resistance mechanism has not been well understood. In the current study, we experimentally evaluated the tribological behavior of ULWPE, and investigated its high wear resistance mechanism in terms of microstructure, crystallization properties, mechanical, physical, and chemical properties. ULWPE manifested the best tribological performance on pin-on-disc (POD) wear tests compared with the most widely used artificial joints materials, with a wear volume of 0.720 ± 0.032 mm3/million cycles (Mc) and 0.600 ± 0.027 mm3/Mc against cobalt-chromium (CoCr) alloy disc and zirconia toughened alumina (ZTA) ceramic disc, respectively. The results of the wear morphology analysis showed that the surface of ULWPE was the slightest, with no obvious surface damage, debris shedding and wear pits. We reveal that three major factors mainly contributed to its high wear resistance. First, ULWPE demonstrated a high crystallinity and a compact crystalline morphology comprised of long linear molecular chains, which contributed to its good mechanical performance. As confirmed by the mechanical test, ULWPE had a very high density, hardness, and tensile elongation at break. The high hardness and strength laid a solid foundation to a low wear volume, and its high ductility and hardness helped to endure abrasive and adhesive wear, resulting in excellent wear resistance. Second, the results of wettability analysis showed that the contact angle formed on the surface of ULWPE was the lowest and the surface energy was the highest. The hydrophilicity of ULWPE provided good lubrication conditions in body fluid. Third, it also had a lower oxidation index. The high hardness, high strength, high ductility and good wetting of ULWPE materials reduced the damage of the material to adhesion and abrasive wear, resulting in excellent wear resistance.

Tribological Properties of Ion Implanted UHMWPE Against Si3N4 under Different Lubrication Conditions

Anomalous Wear Behavior of UHMWPE During Sliding Against CoCrMo Under Varying Cross-Shear and Contact Pressure

Investigation on bio-tribological properties of UHMWPE-SiC ceramic pair

Ti3C2Tx‐UHMWPE Nanocomposites—Towards an Enhanced Wear‐Resistance of Biomedical Implants

Structural and tribological characteristics of ultra-low-wear polyethylene as artificial joint materials

DNA hypomethylation and human diseases.

Comparison of the bio-tribological properties of UHMWPE-Chirulen® and PEEK-OPTIMA® articulating against ceramics: Implications for orthopedic implants

Effect of metformin on glucose metabolism in the splanchnic bed

Wear Mechanisms of Untreated and Gamma Irradiated Ultra-High Molecular Weight Polyethylene for Total Joint Replacements

Wear Mechanism and Wear Debris Characterization of ULWPE in Multidirectional Motion

Impact of UHMWPE texture on friction and wear resistance of hip prosthesis

Basic Bio-Tribological Performance of Insulating Si3N4-Based Ceramic as Human Body Replacement Joints

Study on the Wettability and Tribological Behavior of Different Polymers As Bearing Materials for Cervical Prosthesis

Wear Performance of a Novel Silicon Nitride Ceramic for Biomedical Applications

Wear Performance of UHMWPE and Reinforced UHMWPE Composites in Arthroplasty Applications: A Review

Climatic Fluctuations Due to Deep Ocean Circulation

Comparison of prosthetic feet prescribed to active individuals using ISO standards

Tribological analysis of cross linked UHMWPE used in artificial knee replacement

Effect of different loads on wear mechanisms of polyether-ether-ketone in normal saline and debris-isolating method

In vitro wear study of PEEK and CFRPEEK against UHMWPE for artificial cervical disc application

Fabrication and tribological behavior of novel UHMWPE/vitamin-C/graphene nanoplatelets based hybrid composite for joint replacement