Abstract:Polysilicon based pressure sensors use a silicon dioxide layer for isolation of piezoresistors from bulk. This helps in reducing the leakage current compared to the p–n junction isolation in silicon piezoresistors. They are also more cost effective than silicon-on-insulator (SOI) based sensors for high temperature applications. This paper reports the design, fabrication process and characterization of a polysilicon piezoresistive pressure sensor with wet bulk micromachined diaphragm. Novel meander shaped polysilicon piezoresistors are placed at optimized locations, found using finite element method (FEM) simulations, to experience high stress. The effect of clamping conditions of the diaphragm on the piezoresistors placement is shown through FEM simulations and the piezoresistor shapes are designed to keep the metal lines outside the diaphragm structure for better reliability. After fabrication and dicing, the mechanical characterization of the sensor is performed using laser doppler vibrometer (LDV) for determining the first mode resonance frequency and transient response of the sensor diaphragm. A first mode resonant frequency of 306.6 kHz and a response time of 0.56 ms are obtained. The sensor is then packaged inside a customized jig and tested with pressure load for determining the static and temperature characteristics of the sensor in the pressure range of 0–30 Bar. The sensor is tested at three different temperatures, viz. −5, 25 and 55 °C. A sensitivity of 3.35–3.73 mV/Bar, non-linearity of less than 0.3 %, and a hysteresis of less than 0.1 % are obtained for all the test temperatures.

Polysilicon Piezoresistive Pressure Sensor and Its Temperature Compensation

A Soft Piezoresistive Pressure Sensor Based on Porous Conductive CB/PDMS Composite

A novel temperature compensated piezoresistive pressure sensor

Thermal Compensation System for Silicon Piezoresistive Pressure Sensors based on Surface Fitting and Wild Horse Algorithm

A Smart High Accuracy Silicon Piezoresistive Pressure Sensor Temperature Compensation System.

High-Temperature Pressure And Temperature Multi-Function Sensors

Polysilicon Nanofilm Pressure Sensor

The Compensation for Hysteresis of Silicon Piezoresistive Pressure Sensor

A High-Temperature Piezoresistive Pressure Sensor with an Integrated Signal-Conditioning Circuit

Research on Poly-Silicon Integrated Pressure Sensor for High Temperature

Temperature Compensated Wide-Range Micro Pressure Sensor with Polyimide Anticorrosive Coating for Harsh Environment Applications

A Digital Compensation Method for Piezoresistive Pressure Sensor

Polymer-Assisted Pressure Sensor with Piezoresistive Suspended Graphene and Its Temperature Characteristics

Piezoresistive pressure sensor with dual-unit configuration for on-chip self-compensation and suppression of temperature drift

Design and Experimental Research of a Temperature Compensation System for Silicon-on-Sapphire Pressure Sensors

Research on temperature drift mechanism and compensation method of silicon piezoresistive pressure sensors

Optical Temperature Sensor Based on Polysilicon Waveguides

Polysilicon thin film piezoresistive pressure microsensor: design, fabrication and characterization

An Electrothermally Excited Dual Beams Silicon Resonant Pressure Sensor with Temperature Compensation

Design of Temperature Compensation for Silicon-Sapphire Pressure Sensor

Computer simulation of polysilicon piezoresistive pressure sensors