Abstract:A novel glucose biosensor based on the electrochemical detection of enzymatically generated H2O2 was constructed by the effective immobilization of glucose oxidase (GOD) via glutaraldehyde cross-linking with a poly(thionine) (PTH)-modified Au electrode, followed by coating with a Nafion outer layer to obtain high selectivity. An electrochemical quartz crystal microbalance (EQCM) was used to track various modification procedures. The mass of the deposited PTH via cyclic voltammetric electropolymerization of thionine in aqueous H2SO4 was estimated from the “dry” frequency shift after fully removing the PTH layer via its acidic degradation, allowing us to evaluate the electroactivity per unit mass of PTH. A Nafion/glucose oxidase-glutaraldehyde/poly(thionine)/Au electrode was thus constructed for glucose sensing. We found that the PTH film is a good matrix to immobilize more GOD, and the performance of the constructed sensor is significantly improved compared with its absence, though its mediator effect on the enzyme electrode is negligible. Influence of various experimental parameters on glucose sensing, including the applied potential, solution pH and electroactive interferents, was investigated. At an optimal potential of 0.7V versus the KCl-saturated calomel electrode (SCE), the glucose biosensors were linear with glucose concentration from 0.005 to ∼5mmolL−1, with high sensitivity (13.5Amol−1cm−1), short response time (within ca. 10s) and good anti-interferent ability. The Michaelis constant (Kmapp) of the immobilized GOD was estimated to be 5.47mmolL−1. The biosensor exhibited good storage stability, i.e., 83% of its initial response was retained after 1-month storage in a pH 7.0 phosphate buffer at 4°C. The effective enzymatic specific activity (ESA, defined as enzymatic activity per gram of enzyme) of immobilized GOD was estimated to be 6.85kUg−1 on the basis of the mass of immobilized GOD (from EQCM) and the quantity of hydrogen peroxide as the product of the enzymatic reaction (from amperometric detection), and the leakage of H2O2 from the Nafion/GOD-GA/PTH/Au enzyme electrode at the detection potential, as characterized by a scanning electrochemical microscope (SECM), was found to be an important factor influencing the ESA estimation.

Conducting organic salt modified glucose micro-enzyme electrode

Preparation of glucose dehydrogenase micro-electrode with mediator

A glucose oxidase sensor based on screen-printed carbon electrodes modified by polypyrrole.

Improvement of the Performance of H2O2 Oxidation at Low Working Potential by Incorporating TTF-TCNQ into a Platinum Wire Electrode for Glucose Determination.

Ni(II)–quercetin Complex Modified Multiwall Carbon Nanotube Ionic Liquid Paste Electrode and Its Electrocatalytic Activity Toward the Oxidation of Glucose

Sensitive enzymatic glucose detection by TiO2 nanowire photoelectrochemical biosensors

Enzyme electrocatalysis at the TTF-TCNQ electrode

Highly sensitive and stable glucose sensing using N -type conducting polymer based organic electrochemical transistor

Amperometric bienzyme glucose biosensor based on carbon nanotube modified electrode with electropolymerized poly(toluidine blue O) film

A Glucose Biosensor Based on Direct Electron Transfer of Glucose Oxidase on PEDOT Modified Microelectrode

Volumetric Electron Transfer from Metabolites to Chemically Doped Polymer Electrodes

Enhancement of the Sensitivity and Selectivity of Oxidation of H 2 O 2 on Platinum Wire at Low Working Potential by Platinization and Covering of Heteropolypyrrole Film for Amperometric Micro-Biosensor Construction

Bienzymatic Glucose Biosensor Based on Poly(vinyl alcohol)/Titanium Dioxide Hybrid Materials and Carbon Nanotubes-Nanocopper-Modified Glassy Carbon Electrode

Blending Enzyme Immobilization Enabled High Performance Glucose Sensor Based on an n-channel Organic Electrochemical Transistor

Design of a stable charge transfer complex electrode for a third-generation amperometric glucose sensor

A Sensitive Enzymatic Electrode for Glucose Based on 8B Pencil Lead and Dopamine Polymer for Immobilization of Glucose Oxidase

Improved Enzyme Immobilization for Enhanced Bioelectrocatalyticactivity of Glucose Sensor (Chinese)

One-pot Electrodeposition of 3-Aminopropyltriethoxysilane–chitosan Hybrid Gel Film to Immobilize Glucose Oxidase for Biosensing

Tuning the Redox and Enzymatic Activity of Glucose Oxidase in Layered Organic Films and Its Application in Glucose Biosensors

Construction As Well As Eqcm and Secm Characterizations of A Novel Nafion/Glucose Oxidase-Glutaraldehyde/Poly(Thionine)/Au Enzyme Electrode for Glucose Sensing

Highly Selective and Sensitive Glucose Sensors Based on Organic Electrochemical Transistors Using TiO2 Nanotube Arrays-Based Gate Electrodes