Abstract:A novel amperometric glucose biosensor based on the nine layers of multilayer films composed of multi-wall carbon nanotubes (MWCNTs), gold nanoparticles (GNp) and glucose oxidase (GOD) was developed for the specific detection of glucose. MWCNTs were chemically modified with the H(2)SO(4)-HNO(3) pretreatment to introduce carboxyl groups which were used to interact with the amino groups of poly(allylamine) (PAA) and cysteamine via 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide/N-hydroxysuccinimide cross-linking reaction, respectively. A cleaned Pt electrode was immersed in PAA, MWCNTs, cysteamine and GNp, respectively, followed by the adsorption of GOD, assembling the one layer of multilayer films on the surface of Pt electrode (GOD/GNp/MWCNTs/Pt electrode). Repeating the above process could assemble different layers of multilayer films on the Pt electrode. PBS washing was applied at the end of each assembly deposition for dissociating the weak adsorption. Film assembling and characterization were studied by transmission electron microscopy and quartz crystal microbalance, and properties of the resulting glucose biosensors were measured by electrochemical measurements. The marked electrocatalytic activity of Pt electrode based on multilayer films toward H(2)O(2) produced during GOD enzymatic reactions with glucose permitted effective low-potential amperometric measurement of glucose. Taking the sensitivity and selectivity into consideration, the applied potential of 0.35 V versus Ag/AgCl was chosen for the oxidation detection of H(2)O(2) in this work. Among the resulting glucose biosensors, the biosensor based on nine layers of multilayer films was best. It showed a wide linear range of 0.1-10mM glucose, with a remarkable sensitivity of 2.527 microA/mM, a detection limit of 6.7 microM estimated at a signal-to-noise ratio of 3 and fast response time (within 7s). Moreover, it exhibited good reproducibility, long-term stability and the negligible interferences of ascorbic acid, uric acid and acetaminophen. The study can provide a feasible approach on developing new kinds of oxidase-based amperometric biosensors, and can be used as an illustration for constructing various hybrid structures.

Tuning the Redox and Enzymatic Activity of Glucose Oxidase in Layered Organic Films and Its Application in Glucose Biosensors

Sensitive Electrochemical Sequential Enzyme Biosensor for Glucose and Starch Based on Glucoamylase- and Glucose Oxidase- Controllably Co-Displayed Yeast Recombinant

Ordered Multilayer Film Electrode Containing Glucose Oxidase Based on Layer-By-Layer Self-Reaction

An Amperometric Biosensor for Glucose Based on Electrodeposited Redox Polymer/Glucose Oxidase Film on a Gold Electrode

An Amperometric Glucose Biosensor Incorporating A Permeable Pre-Oxidation Layer

Use of Chitosan for Developing Layer-By-Layer Multilayer Thin Films Containing Glucose Oxidase for Biosensor Applications

A Biosensor Prepared by Co-Entrapment of a Glucose Oxidase and a Carbon Nanotube Within an Electrochemically Deposited Redox Polymer Multilayer.

Multilayered construction of glucose oxidase on gold electrodes based on layer-by-layer covalent attachment

Efficient Immobilization of Glucose Oxidase on Nanocomposite via Layer-by-Layer Self-Assembly to Construct Bionanomultilayer Films

Multilayer Membranes Via Layer-By-Layer Deposition Of Organic Polymer Protected Prussian Blue Nanoparticles And Glucose Oxidase For Glucose Biosensing

An Amperometric Glucose Biosensor Based on Layer-by-layer GOx-SWCNT Conjugate/redox Polymer Multilayer on a Screen-Printed Carbon Electrode

Amperometric glucose biosensor based on multilayer films via layer-by-layer self-assembly of multi-wall carbon nanotubes, gold nanoparticles and glucose oxidase on the Pt electrode.

Amperometric glucose biosensor based on layer-by-layer assembly of multilayer films composed of chitosan, gold nanoparticles and glucose oxidase modified Pt electrode.

Glucose Oxidase Modified Electrode Fabricated by Layer-by-layer Molecular Deposition

Direct Electrochemistry of Glucose Oxidase on Screen-Printed Electrodes Through One-Step Enzyme Immobilization Process with Silica Sol–gel/polyvinyl Alcohol Hybrid Film

Direct Electrochemistry of Glucose Oxidase Based on One Step Electrodeposition of Reduced Graphene Oxide Incorporating Polymerized L-Lysine and Its Application in Glucose Sensing.

Multilayer Assembly of Prussian Blue Nanoclusters and Enzyme-Immobilized Poly(Toluidine Blue) Films and Its Application in Glucose Biosensor Construction

Amperometric Glucose Enzyme Electrode by Immobilizing Glucose Oxidase in Multilayers on Self-Assembled Monolayers Surface.

Enzyme-free glucose sensor based on layer-by-layer electrodeposition of multilayer films of multi-walled carbon nanotubes and Cu-based metal framework modified glassy carbon electrode.

Glucose Oxidase Immobilized in Alginate/Layered Double Hydroxides Hybrid Membrane and Its Biosensing Application

Improved Enzyme Immobilization for Enhanced Bioelectrocatalyticactivity of Glucose Sensor (Chinese)