Abstract:The objective of this work is to study the selective catalytic reduction (SCR) of NOx from diesel engine emissions over a new catalyst system and to find out the relationship between the activity of the catalyst and its surface structure. The catalysts doped with different metal elements (Mo, Sn and Ni) on HZSM-5 were prepared by using impregnation method. It was found that the Mo/ZSM-5 catalyst is the best one for NO decomposition reaction among Sn/ZSM-5, Mo/ZSM-5 and Ni/ZSM-5. Thus, four catalyst samples with Mo as active component were also prepared through different methods (ion-migration, impregnation, physically mixing and synthesizing). The results showed that, with NH3 as a reductant, and under the conditions of 0.06% NO-3.5 O-2-0.06%NH3-96.38%Ar and q(V)(feed)=300 ml/min, the catalyst prepared through ion-migration has the highest activity for SCR of NO and the NO conversion reaches to 95% at 360degreesC. The Mo/ZSM-5 samples were characterized by using XRD, SEM, ICP and EDS techniques respectively. The results indicated that the catalyst prepared through ion-migration has better dispersion of Mo on the inner surface of ZSM-5 than those prepared through other methods. This is probably responsible for its higher catalytic activity in SCR of NO. Then it was tentatively supposed that some special structure, which can favor the SCR of NO, may be in existence on the catalyst surface. On the other hand, the catalyst prepared through synthesis method showed good catalytic performance at low temperature, although its catalytic activity is lower than that of the sample prepared through ion-migration.

Selective catalytic reduction of NO with C3H6 over CuCl/ZSM-5 zeolites prepared by disperse method

Higher Activity of Cucl2/Hzsm-5 Prepared by Dispersion Method in Selective Catalytic Reduction of No by Propylene (Scr-Hc) at Lower Temperature

Selective catalytic reduction of nitrogen monoxide with propene over CuCl/MCM-41 catalysts

The structure of CuO-ZrO2 mixed oxides and its influence on the catalytic selective reduction of NO by propene

Selective Catalytic Reduction of NOx by Hydrocarbons over Copper-Free Metal Supported Zeolite

Removal of NO by selective catalytic reduction with ethylene over catalyst Cu/ZSM-5

Study on the selective catalytic reduction of NO by C3 H6 with metal organic material MOF-5

Selective catalytic reduction of NO over metal oxide or noble metal-doped In 2 O 3 /Al 2 O 3 catalysts by propene in the presence of oxygen

Studies On Selectively Catalytic Reduction Of Nox By Methane Over Ag-Zsm-5 Catalysts

A novel Cu-Mo/ZSM-5 catalyst for NOx catalytic reduction with ammonia

Molybdenum loaded on HZSM-5: A catalyst for selective catalytic reduction of nitrogen oxides

Comparative study of ZSM‐5 supported transition metal (Cu, Mn, Co, and Fe) nanocatalysts in the selective catalytic reduction of NO with NH3

The mechanism of selective catalytic reduction of NO x on Cu-SSZ-13 - a computational study.

Study on Catalytic Reduction of NO on CuO/TiZrO4 in the Presence of Excess Oxygen

On the performance of Fe-Cu-ZSM-5 catalyst for the selective catalytic reduction of NO with NH3: the influence of preparation method

Effect of the preparation method on activity of Cu-ZSM-5 nanocatalyst for the selective reduction of NO by NH3

Structure, Acidity and Activity of CuOx/WOx–ZrO2 Catalyst for Selective Catalytic Reduction of NO by NH3

Selective Catalytic Reduction of No by Propane over Bifunctional Catalyst of Transition Metal Al2o3/H-Usy in Excess Oxygen

Selective Catalytic Reduction of NO over Mo/ZSM-5 Catalyst

Influence of Fe–Cu-SSZ-13 and hybrid Fe–Cu-SSZ-13 zeolite catalyst in ammonia-selective catalytic reduction (NH3-SCR) of NOx

Strong metal oxide-zeolite interactions during selective catalytic reduction of nitrogen oxides