Abstract:Dual fluidized bed (DFB) reactor systems are widely used in gas–solid two-phase flow applications, whose gas–solid flow characteristics have a significant effect on the performance of many kinds of technologies. A numerical simulation model was established on the basis of a large-scale DFB reactor with a maximum height of 21.6 m, and numerical simulations focused on gas–solid flow characteristics were carried out. The effects of the superficial gas velocity of both beds and the static bed height and particle size on the distribution of the pressure and solid suspension density and the solid circulation rate were studied. The simulation results were in good agreement with the experimental data. With the strong support of the experimental data, the gas–solid flow characteristics of large-scale DFB reactors were innovatively evaluated in this numerical simulation study, which effectively makes up for the shortcomings of the current research. The results showed that the superficial gas velocity of both beds and the static bed height have different degrees of influence on the gas–solid flow characteristics. Specifically, for 282 μm particles, when the superficial gas velocity of both beds and the static bed height were 4.5 m/s, 2.5 m/s, and 0.65 m, respectively, under typical working conditions, the bottom pressure of the two furnaces was 3412.42 Pa and 2812.86 Pa, respectively, and the solid suspension density was 409.44 kg/m3 and 427.89 kg/m3, respectively. Based on the simulation results, the empirical formulas of the solid circulation rate were fitted according to different particle sizes. Under similar conditions, the solid circulation rates of particles with a particle size of 100 μm, 282 μm, 641 μm, and 1000 μm were 2.84–13.28, 0.73–4.91, 0.024–0.216, and 0.0026–0.0095 kg/(m2s), respectively. It can be found that the influence of the particle size on the solid circulation rate is the most significant among all parameters.

The mass flow rate of powders in a gas-solid-solid circulating fluidization reactor

Experimental and numerical investigation of solid behavior in a gas–solid turbulent fluidized bed

Hydrodynamic behaviors of gas-solid-solid circulating fluidized reactor

Studies on Gas–solid–solid Circulating Fluidized-Bed Reactors

Multi-scale Characteristics and Gas-Solid Interaction among Multiple Beds in a Dual Circulating Fluidized Bed Reactor System

Experimental Research on the Gas-Solid Flow Characteristics in Large-Scale Dual Fluidized Bed Reactor

CFD Simulation and Experiments of Dynamic Parameters in Gas–solid Fluidized Bed

Solids mass flux and mean dynamic solids hold-up in the packed section of the gas-solid-solid circulating fluidized bed

Numerical Simulation Study on the Gas–Solid Flow Characteristics of a Large-Scale Dual Fluidized Bed Reactor: Verification and Extension

Control of Pressure Balance and Solids Circulation Characteristics in DCFB Reactors

Dual-dense gas-solid circulating fluidized bed reactor

Transport Hydrodynamics of Particles in a Gas–solid Cyclone Reactor Using a Dense Discrete Phase Model and a Particle Size Segmentation Method

Solids flow characteristics and circulation rate in an internally circulating fluidized bed

Measuring Technologies for CFB Solid Circulation Rate: A Review and Future Perspectives

Experimental Study on the Solid Circulation Rate in an Internally Circulating Fluidized Bed

Experimental Study of High-Density Gas–solids Flow in a New Coupled Circulating Fluidized Bed

Oxidative Dehydrogenation of Butene to Butadiene in Gas-Solid-Solid Circulating Fluidization Reactor

Discussion on the influence of internal components on the flow field distribution of a new gas–solid non-catalytic fluidized bed (NRFB)

Effect of Operating Parameters on Gas‐Solid Hydrodynamics and Heat Transfer in a Spouted Bed

Investigation on Influences of Loose Gas on Gas-Solid Flows in a Circulating Fluidized Bed (CFB) Reactor Using Full-Loop Numerical Simulation

Mass flux profiles and flow regimes in a high density circulating Fluidized bed