Abstract:Dual fluidized bed (DFB) reactor systems are widely used in gas–solid two-phase flow applications, whose gas–solid flow characteristics have a significant effect on the performance of many kinds of technologies. A numerical simulation model was established on the basis of a large-scale DFB reactor with a maximum height of 21.6 m, and numerical simulations focused on gas–solid flow characteristics were carried out. The effects of the superficial gas velocity of both beds and the static bed height and particle size on the distribution of the pressure and solid suspension density and the solid circulation rate were studied. The simulation results were in good agreement with the experimental data. With the strong support of the experimental data, the gas–solid flow characteristics of large-scale DFB reactors were innovatively evaluated in this numerical simulation study, which effectively makes up for the shortcomings of the current research. The results showed that the superficial gas velocity of both beds and the static bed height have different degrees of influence on the gas–solid flow characteristics. Specifically, for 282 μm particles, when the superficial gas velocity of both beds and the static bed height were 4.5 m/s, 2.5 m/s, and 0.65 m, respectively, under typical working conditions, the bottom pressure of the two furnaces was 3412.42 Pa and 2812.86 Pa, respectively, and the solid suspension density was 409.44 kg/m3 and 427.89 kg/m3, respectively. Based on the simulation results, the empirical formulas of the solid circulation rate were fitted according to different particle sizes. Under similar conditions, the solid circulation rates of particles with a particle size of 100 μm, 282 μm, 641 μm, and 1000 μm were 2.84–13.28, 0.73–4.91, 0.024–0.216, and 0.0026–0.0095 kg/(m2s), respectively. It can be found that the influence of the particle size on the solid circulation rate is the most significant among all parameters.

Investigation on Influences of Loose Gas on Gas-Solid Flows in a Circulating Fluidized Bed (CFB) Reactor Using Full-Loop Numerical Simulation

Experimental and numerical investigation of solid behavior in a gas–solid turbulent fluidized bed

CFD Simulation of an Agitated Gas-Fluidized Bed: Effects of Particle–particle Restitution Coefficient on the Hydrodynamics

Gas−Solid Flow Behavior in the Standpipe of a Circulating Fluidized Bed with a Loop Seal

Numerical Analysis of the Operating Characteristics of a Large‐scale CFB Coal‐gasification Reactor with the QC‐EMMS Drag Model

Experimental Research on the Gas-Solid Flow Characteristics in Large-Scale Dual Fluidized Bed Reactor

Application of CPFD Method in the Simulation of a Circulating Fluidized Bed with a Loop Seal Part II—Investigation of Solids Circulation

Investigation on the Hydrodynamic Properties in the External Loop of Circulating Fluidized Bed with a Loop Seal

Numerical Study of Load Characteristics of a CFB Coal Gasifier by Using the Generalized Drag Model

Impact of particle properties on gas solid flow in the whole circulating fluidized bed system

Numerical study of biomass gasification in a 0.3 MWth full-loop circulating fluidized bed gasifier

Numerical study of coal gasification in a dual-CFB Plant based on the generalized drag model QC-EMMS

Impact of Operating Conditions on the Performance of the External Loop in a CFB Reactor

Application of CPFD Method in the Simulation of a Circulating Fluidized Bed with a Loop Seal, Part I—Determination of Modeling Parameters

Numerical study on key issues in the Eulerian-Eulerian simulation of fluidization with wide particle size distributions

Numerical Simulation Study on the Gas–Solid Flow Characteristics of a Large-Scale Dual Fluidized Bed Reactor: Verification and Extension

Effect of bed material size on gas-solid flow characteristics in a CFB at low solid recirculation rates

Investigation on the Internal and External Solid Flow Rates in Large-Scale Circulating Fluidized Bed with Different Layouts of Suspended Heating Surfaces

Simulation of Gas–solid Flow Characteristics in a Circulating Fluidized Bed Based on a Computational Particle Fluid Dynamics Model

LES-DEM Investigation of Gas–solid Flow Dynamics in an Internally Circulating Fluidized Bed

Investigation of Gas-Solid Flow Dynamics and Heat Transfer in Fluidized Beds by Using DEM-LES Coupling Approach