Abstract:Dry-sliding tribological performance of the Fe-28Al-5Cr and its composites containing 15,25,35,50 wt.% TiC, produced by hot-pressing process, was investigated against an AISI 52100 steel ball in ambient environment at varying applied load and sliding speed. It can be found that the coefficient of friction (COF) is irrespective of TiC content and applied load, but increases from 0.46 to 0.60 with increasing sliding speed at the given testing conditions. The wear-resistance increases with an increase of TiC contents. Impressively when TiC amount reaches 50 wt.%, the wear-resistance improves about 4-30 times compared to the pure Fe-28Al-5Cr at different sliding parameters. The wear rates of all the materials increase mildly with an increase in applied load, but are nearly independent of the sliding speed at an applied load of 20 N. The wear rates of the all materials are on the order of 10(-3)-10(-4) mm(3) m(-1). In a word, the addition of the TiC can improve significantly the dry-sliding wear-resistance of the Fe-28Al-5Cr intermetallics at room temperature. The enhanced wear-resistance is attributed to the high hardness of the composites and as well hard TiC phase play a role of load-carrying. Worn surface features of all the materials were examined using a scanning electron microscopy (SEM). The dominant wear mechanism of Fe-28Al-5Cr and 15% composite was flaking-off, but those of 25-50% composites was flaking-off and plowing. (C) 2011 Elsevier B.V. All rights reserved.

Wear Behaviour of Al2o3-Ticn Composite Ceramic Sliding Against Pure Al, Fe and Stainless Steel

Wear Behavior of Al 2 O 3 -Ticn Composite Ceramic Sliding on Stainless Steel

Wear Behaviour and Microstructural Changes of SiCw-Al Composite under Unlubricated Sliding Friction

Friction and wear behaviors of Al 2 O 3 /TiC micro-nano-composite ceramic sliding against metals and hard materials

Wear properties of TiC(N)-Al2O3 composite ceramic-stainless steel pair under dry and lubricated conditions

Sliding Wear of Ceramic/Metal Pairs under Boundary Lubrication of Water and Oil

Unlubricated Friction and Wear Behaviors of Al2O3/TiC Ceramic Cutting Tool Materials from High Temperature Tribological Tests

Unlubricated Friction and Wear Behaviors of Various Alumina-Based Ceramic Composites Against Cemented Carbide

Wear mechanisms of Ti(C, N) ceramic in sliding contact with stainless steel

Tribological characteristics of Ti(CN)-Al2O3 composite ceramic and metal pairs lubricated with water and oil

Reciprocating Friction and Wear Behavior of Ti3AlC2 and Ti3AlC2/Al2O3 Composites Against AISI52100 Bearing Steel

Tribological Characteristics of Si3N4 Ceramic Sliding on Stainless Steel

Tribological Properties of Laminated WC/TiC Ceramic Cutting Tool Materials Sliding Against Bearing Steel

Tribological Characterization of an Alumina-Based Composite in Dry Sliding Contact Against Laser-Heated and Unheated Inconel 718

Dry-sliding Tribological Behavior of Fe–28Al–5Cr/TiC Composites

Study on Dry Sliding Friction and Wear Properties of Ti2AlN/TiAl Composite

Friction and Wear of Si3N4 Ceramic/stainless Steel Sliding Contacts in Dry and Lubricated Conditions

Wear Behavior and Self Tribofilm Formation of Hot-Pressed Al2O3/TiC/CaF2 Ceramic Composites Sliding Against Cemented Carbide

Friction and Wear Behavior of NiAl–10wt%Ti3SiC2 Composites

Dry-sliding tribological properties of laminated WC/TiC ceramic cutting tool material sliding against 316 L austenitic stainless steel

Tribological behavior of aluminum matrix composites reinforced with ceramic particulates in dry sliding against a semimetallic friction material