Abstract:ZrO2 is a versatile material with diverse applications, including structural ceramics, sensors, and catalysts. The properties of ZrO2 are largely determined by its crystal structure, which is temperature‐ and atmosphere dependent. Thus, this work focuses on a quantitative analysis of the temperature‐ and gas atmosphere‐dependent phase transformation of tetragonal t‐ZrO2 into monoclinic m‐ZrO2 during heating–cooling cycles from room temperature to 1273 K. Synchrotron‐based in situ X‐ray diffraction (XRD) studies in gas atmospheres of different reduction strengths, namely, 5 vol% H2/Ar, He, CO2, and air, revealed a stabilizing effect of inert and reductive environments, directly yielding different temperature onsets in the phase transformation during cooling (i.e., 435, 510, 710, and 793 K for 5 vol% H2/Ar, He, CO2, and air, respectively). Rietveld refinement shows a direct influence of the atmosphere on grain size, unit cell, and weight fraction of both polymorphs in the product composite matrix. The tetragonal‐to‐monoclinic (t–m) phase transformation is suppressed in the sample heated only up to ∼850 K, independent of the gas atmosphere. The results of ex situ XRD, transmission electron microscopic, electron paramagnetic resonance, and oxygen titration experiments confirmed that the phase transformation is accompanied by a change in the crystallite/particle size and the amount of lattice defects (i.e., oxygen vacancy). Due to the different onset temperatures, a complex interplay between kinetic limitations of phase transformation and grain sintering yields different pathways of the phase transformation and, eventually, very different final crystallite sizes of both t‐ZrO2 and m‐ZrO2.

Quantitative analysis of zirconia powder by rietveld method of X-ray diffraction

Controlled sintering and phase transformation of yttria-doped tetragonal zirconia polycrystal material

Crystal Structure of Zirconia by Rietveld Refinement

Effect of Temperature on the Phase Behaviors of Zircon by Carbothermal Reduction-Nitridation

A quantitative microscopic view on the gas‐phase‐dependent phase transformation from tetragonal to monoclinic ZrO2

Study of Influence of Calcination Atmosphere on Phase Transformation of Zirconia by UV Raman Spectroscopy

Influence of yttria addition on the phase transformations of zirconia from zircon ore by carbothermal reduction process

Influence of Ceo2 Additive on the Phase Transformations of Zirconia from Zircon Ore by Carbothermal Reduction Process

Unusual Calcination Temperature Dependent Tetragonal–monoclinic Transitions in Rare Earth-Doped Zirconia Nanocrystals

Effect of Maltose for the Crystallization of Tetragonal Zirconia

Effect of Thermal Treatment on Microstructure and Phase of Partially-Stabilized Zirconia

Study of Factors Influencing the Microstructure and Phase Content of Ultrafine Y-Tzp

Diffusionless Cubic-To-Tetragonal Phase-Transition And Microstructural Evolution In Sintered Zirconia Yttria Ceramics

Phase Transformation in the Surface Region of Zirconia and Doped Zirconia Detected by UV Raman Spectroscopy

Sintering Behavior and Mechanical Properties of Alumina-Coated Zirconia Ceramics

Effect of reaction temperature on crystallization of nanocrystalline zirconia synthesized by microwave-hydrothermal process

Effects of Calcination Temperature on Grain Growth and Phase Transformation of Nano-Zirconia with Different Crystal Forms Prepared by Hydrothermal Method

Synthesis and characterization of yttria-stabilized tetragonal zirconia polycrystalline powder coated with silica layers

Optimisation on the stability of CaO-doped partially stabilised zirconia by microwave heating

Quantification of Yttria in Stabilized Zirconia by Raman Spectroscopy

Preparation and Microstructure of Nanometer Tetragonal Polycrystal Zirconia Powder at Low Temperature Condition