Abstract:Whether in military or civilian use, frequency-modulated continuous-wave (FMCW) radars play a very important role, but common FMCW radars need to collect both radar echo signals and hardware synchronization signals during echo signal processing. Therefore, this article proposes a new synchronization algorithm, i.e., the four-threshold frequency band variance (FFBV) synchronization algorithm. Then, we combine theoretical derivation and experimental verification to analyze the performance of the FFBV synchronization algorithm. With assistance of the FFBV synchronization algorithm, the soft synchronization FMCW radar can achieve the same functions without hardware synchronization signals. First, we analyze the principle behind the FMCW radar based on intermittent ramp signals. Second, we analyze the design of the FFBV synchronization algorithm. In addition, we verify the performance of the algorithm when the received signal is corrupted by the additive white Gaussian noise (AWGN). Then, we analyze the performance from two aspects, including the performance of the algorithm under different signal-to-noise ratio (SNR) conditions, as well as the performance comparison with other common synchronization algorithms. Finally, experimental results show that the FFBV synchronization algorithm has achieved good performance in solving the signal synchronization issue of the FMCW radar under the condition of low SNR. Especially, the SNR required by the FFBV synchronization algorithm is 2 and 6.5 dB lower than that required by the three-threshold synchronization algorithm and variance synchronization algorithm, respectively, under the same condition that the accuracy is 90%.

FMCW front ends at W-band and technique of highly linear real-time calibration

Design of rf front end for cavity beam position monitor based on ics *

A Low-Power Low-Noise Direct-Conversion Front-End with Digitally Assisted IIP2 Background Self Calibration

Broadband Linearity Enhancement Method for a 1.3 GHz-2.5 GHz Digitally-Assisted Oscillator in a 55-Nm CMOS Technology

A 90-98-ghz FMCW Radar Transceiver Supporting Broadband Modulation in 65nm CMOS

Intermediate Frequency Circuit Design for a 60ghz LFMCW Radar

A 17.7–19.2-Ghz Receiver Front End with an Adaptive Analog Temperature- Compensation Scheme

A Front-End of FMCW Anticollision Radar

Design of a High-Linearity RF Front-End with IP2 Calibration for SAW-less WCDMA Receivers.

A $K$ -Band Portable FMCW Radar with Beamforming Array for Short-Range Localization and Vital-Doppler Targets Discrimination

Calibrated and Frequency Traceable D-Band FMCW Radar for VNA-like S-Parameter Measurements

A 151-to-173 GHz FMCW Transmitter Achieving 14 Dbm Psat with Synchronized Injection-Locked Power Amplifiers and Five In-Phase Power Combining Doublers in 65nm CMOS

A Low Phase Noise and High Linearity Class-C VCO for FMCW Radar System

Two channel balanced RF FMCW FrontEnd for radar applications

Research on Thickness Measurement Technology Based on FMCW Radar

FFBV Algorithm Design for Soft Synchronization FMCW Radar

A high-linearity receiver RF front-end with a high-performance 25%-duty-cycle LO generator for WCDMA/GSM applications

A 12-Ghz All-Digital Calibration-Free FMCW Signal Generator Based on a Retiming Fractional Frequency Divider

A Dual-Mode Analog Baseband Utilizing Digital-Assisted Calibration for WCDMA/GSM Receivers

Millimeter-Wave FMCW Signal Generators for Radar Applications

Improved Framework of FMCW Signal Processing Based on the PS End of FPGA