Abstract:Magnetoinductance (MI) elements were constructed by winding a single coil on Co67Fe4Si14.5B14.5 amorphous ribbons fabricated by a single-roller melt-spinning technique. The effect of annealing methods on magnetic properties of amorphous ribbons was investigated. It was found that saturation magnetization, coercive force, and effective permeability of Co-amorphous ribbons were further improved by applying a magnetic field during annealing process. MI effect was evaluated by measuring the inductance under the magnetic field along the axis of MI elements. Experimental results showed that MI effect exhibited a characteristic of single peak curve and decreased with external magnetic fields regardless of the annealing methods. Although MI effect also decreased with frequency, the effect of frequency on MI effect was quite different for amorphous ribbons annealed with different processes. At the low frequency of 100 Hz, both the maximum inductance of similar to 3.5 x 10(-4) H and maximum magnetic field sensitivity of similar to 37%/(A/m) belonged to MI elements with the ribbons annealed with the longitudinal magnetic field (LF). But at higher frequencies like 200 kHz, the annealing treatment LF was unexpectedly deteriorated to MI effect and the inductance and sensitivity of MI elements with the ribbons annealed longitudinal magnetic fields were even lower than those of MI elements with the as-quenched amorphous ribbons. By applying a transverse magnetic field during annealing process for amorphous ribbons, MI effect was always improved at all testing frequencies. The results were analyzed in terms of magnetic properties and magnetization process.

Effect of Magnetic Field Annealing on the Giant Magnetoimpedance in Fecumosib Ribbons

Effect of Annealing Temperature on Permeability and Giant Magneto-Impedance of Fe-based Amorphous Ribbon

Valve Behavior Of Giant Magnetoimpedance In Field-Annealed Co70fe5si15nb2.2cu0.8b7 Amorphous Ribbon

Enhanced Gmi Effect in A Co70fe5si15b10 Ribbon Due to Cu and Nb Substitution for B

Optimized Giant Magnetoimpedance Effect In Amorphous And Nanocrystalline Materials

Effect of Applied Dc Fields on the Domain Wall Magnetization Processes of Fenbbcu Soft Magnetic Nanocrystalline Ribbons at Low Frequencies

Effects of annealing on giant magnetic impedance in soft magnetic Fe79.5P12C6Cu0.5Mo0.5Si1.5 alloy ribbons

Magneto-Impedance In Fe73.5cu1mo3si13.5b9 Alloy Ribbons

Effect of Annealing on the Microstructure and Magnetic Properties of Fe-based Nanocomposite Materials

Influence of Magneto-Thermal Treatments on Longitudinally Driven Giant Magneto-Impedance Effect in Co-Fe-Si-B Amorphous Ribbons

Combined Current-Modulation Annealing Induced Enhancement Of Giant Magnetoimpedance Effect Of Co-Rich Amorphous Microwires

Investigation on the Giant Magnetoimpedance of Fe89−xZr7B4Alx (x=0 and 2.5) Nanocrystalline Ribbons

Influence of Field Annealing on Giant Magneto-Impedance Effect of Co-Based Melt Extraction Amorphous Wires

Effect of transverse magnetic field annealing on the magnetic properties and microstructure of FeSiBNbCuP nanocrystalline alloys

Effect of magnetic field annealing on the soft magnetic properties of CoFeSiB ribbon and its fluxgate performance

Magnetoinductance Effect in Co 67 Fe 4 Si 14.5 B 14.5 Amorphous Ribbons Annealed with Different Orientation Magnetic Fields

Correlation of Magnetic Domains, Microstructure and Gmi Effect of Joule-Annealed Melt-Extracted Co68.15fe4.35si12.25b13.75nb1cu0.5 Microwires for Double Functional Sensors

Effect of magnetic field annealing on soft magnetic properties for (Fe0.5Co0.5)73.5Cu1Nb3Si13.5B9 alloy

Effect of annealing orientation on the giant magnetoimpedance in micro-patterned Co-based ribbon

Mechanism of magnetic field annealing on increasing both coercivity and magnetization of Sm(Co0.9Cu0.1)5 ribbons

Effect Of Annealing On The Giant Magneto-Impedance Of Co-Based Wires