Abstract:Flat-field concave diffraction grating is the key device of a portable grating spectrometer with the advantage of integrating dispersion, focusing and flat-field in a single device. It directly determines the quality of a spectrometer. The most important two performances determining the quality of the spectrometer are spectral image quality and diffraction efficiency. The diffraction efficiency of a grating depends mainly on its groove shape. But it has long been a problem to get a uniform predetermined groove shape across the whole concave grating area, because the incident angle of the ion beam is restricted by the curvature of the concave substrate, and this severely limits the diffraction efficiency and restricts the application of concave gratings. the authors present a two-step method for designing convex gratings, which are made holographically with two exposure point sources placed behind a plano-convex transparent glass substrate, to solve this problem. The convex gratings are intended to be used as the Master gratings for making aberration-corrected flat-field concave gratings. To achieve high spectral image quality for the replicated concave gratings, the refraction effect at the planar back surface and the extra optical path lengths through the substrate thickness experienced by the two divergent recording beams are considered during optimization. This two-step method combines the optical-path-length function method and the ZEMAX software to complete the optimization with a high success rate and high efficiency. In the first step, the optical-path-length function method is used without considering the refraction effect to get an approximate optimization result. In the second step, the approximate result of the first step is used as the initial value for ZEMAX to complete the optimization including the refraction effect. An example of design problem was considered. The simulation results of ZEMAX proved that the spectral image quality of a replicated concave grating is comparable with that of a directly recorded concave grating.

Study on the replicating technique of high-frequency phase-style deformed gratings from a curved surface

Two-dimensional Surface Profile Imaging Technique Based on a Double-Grating Frequency Shifter

Residual strain evaluation of curved surface by grating-transferring technique and GPA

High-Frequency Deformation Grating Fabrication Techniques and Applications

Characterizing the Bending Deformation of Polymer Utilizing the Diffraction Spectrum of a Holographic Grating on a Flexible Substrate

A study on the digital nano-moiré method and its phase shifting technique

Fabrication of Thermal-Resistant Gratings for High-Temperature Measurements Using Geometric Phase Analysis

In situ high temperature creep deformation of micro-structure with metal film wire on flexible membrane using geometric phase analysis.

Direct Design Method for Holographic Grating Imaging Spectrometer and Corresponding Recording System

New Methods of Fabricating Gratings for Deformation Measurements: A Review

Fabrication Of High Temperature Moire Grating And Its Application

Deformation grating fabrication technique based on the solvent-assisted microcontact molding.

Study of creep deformation of metal materials with moire interferometry

Fabrication of high-frequency moiré gratings for microscopic deformation measurement using focused ion beam milling

Design Method of Convex Master Gratings for Replicating Flat-Field Concave Gratings

An Experimental Study on Digital Nano-Moire Method

Electron moiré method and its application to micro-deformation measurement

Thermal Deformation Measurement of Electronic Package Using Advanced Moire Methods

Phase-shifting Grating Microscope with Slab-Tilting Method for Deformation Measurement

Grating Fourier Analysis and Computer Moiré Technique

Micro-Measurement Using Grating Microscopy