Abstract:Purpose This study aims to form composite solid lubricant coatings on the surface of bearing steel, which can significantly improve the tribological properties of thrust cylindrical roller bearings (TCRBs). Phosphating films possess microscopic porosity that typically needs to be sealed with oil, grease or wax. Due to its unique crystal structure, the phosphating film itself also exhibits a certain degree of lubricity. In this study, solid lubricants are used to fill the pores of the phosphating film. By combining the phosphating film with solid lubricants, lubrication and wear reduction can be achieved. Design/methodology/approach In this study, the surfaces of the shaft washer (WS) and seat washer (GS) were treated with zinc-phosphating. Subsequently, a solid lubricant solution (polytetrafluoroethylene [PTFE], MoS 2 and graphite) was sprayed onto the phosphated samples at concentrations of 1 , 2 and 3 g/L. The porous and adsorptive nature of the phosphating film was used to embed the solid lubricant particles into the film, thus forming a composite lubrication layer containing solid lubricants on the surface of the bearing steel. Findings The addition of solid lubricant materials has shown significant potential in reducing wear losses compared with phosphated samples without such additives. Increasing the amount of solid lubricant added can facilitate the formation of a transfer film, which further enhances the protective properties. However, it is important to note that excessive amounts of solid lubricant material can contribute to seizure, leading to increased wear losses of the cage and a higher average coefficient of friction (ACOF).By spraying a PTFE solution with a concentration of 2 g/L, the lowest ACOF and cage wear loss were achieved, resulting in reductions of 60.5% for the ACOF and 89.4% for the cage wear loss. Similarly, when spraying a graphite solution with a concentration of 3 g/L, the lowest wear losses for GS and WS were observed, with reductions of 51.7% for GS wear loss and 38.9% for WS wear loss. Originality/value The combination of the phosphating film and solid lubricants aims to achieve lubrication and wear reduction, providing a new approach to wear-resistant technology for TCRBs. Peer review The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-07-2023-0231/

Tribological characteristics of solid-lubricant embedded Tin-bronze bearings

Study on the Tribological Characteristics of Solid Lubricants Embedded Tin‐bronze Bearings

A Comparative Investigation of the Tribological Behavior and Wear Mechanism of Bronze-graphite Composite under Dry- and Water-lubricated Sliding Against Steel

Study on Friction and Wear Properties of New Self-Lubricating Bearing Materials

The Tribological Characteristics Of Js Material Under Lubrication Of Oil

Investigation of Dry Sliding Friction Wear Behavior of CuSn11 Bronze Plain Bearing Applying Impregnated Graphite-Filled PTFE

Study on the tribological performance of self-lubricating thrust ball bearings with different embedded features

Detailed assessments of tribological properties of binder jetting printed stainless steel and tungsten carbide infiltrated with bronze

Analysis of the lubrication process with composition of solid lubricants of laser-modified sliding surfaces

Experimental Investigation of Tribological Performance of Ptfe-Derived Solid Lubricants in Sliding Building Bearings

Effects of Lubricants on Friction and Wear of Ti(Cn)/1045 Steel Sliding Pairs

Tribological Properties of Groove-Textured Ti-6Al-4V Alloys with Solid Lubricants in Dry Sliding against GCr15 Steel Balls

Tribological behavior of PTFE/Nomex/phenolic composite lubricant under cold forming condition in the bearing assembly process

Tribological Properties Of Polytetrafluoroethylene-Based Composite In Different Lubricant Media

Tribological Properties of CrN Coating Deposited on 20crmo Against Tin Bronze

The Effect of Solid-Liquid Composite Lubrication on the Tribological Properties of Bearing Steel

Effect of composite solid lubricant coatings on the tribological performance of thrust cylindrical roller bearings

Tribological evaluation of thermoplastic polyurethane-based bearing materials under water lubrication: Effect of load, sliding speed, and temperature

Tribological Properties of Lubricating Oil with Sheet Graphite Nanoparticles

Impact of lubrication on the tribological behaviour of PTFE composites for guide rings application

Influence of Production Modes on the Structure and Tribological Properties of Sintered Tin Bronze during Friction with Lubricant in Friction Units