Abstract:A number of compact cyclotrons accelerating H- ions to energies between 10 MeV and 100 MeV have recently been constructed for research and medical diagnostics/therapy in several countries. However limitations in extracted beam intensity are brought up by inadequate injection efficiency from the ion source into the machine. To improve the optics matching from the external source to machine acceptance, a specially designed small doublet has been developed to replace the traditionally used solenoid in the vertical injection line before the spiral inflector. Due to the narrow space inside the compact cyclotron, the doublet is designed based on the following special consideration: 1) To use the central plug of the main magnet as a part of the return yoke of the doublet; 2) To use the capillary water-cooling conductor for the coil to keep the doublet sufficiently small; 3) To adopt an integral design of the two quadrupoles into one assembly so that they could be installed in the channel of the central plug in high vacuum environment. In this paper, the design of the doublet is introduced. The outer diameter of 118 mm is precisely fit to the central plug of the Verification Facility of High Intensity Cyclotron at CIAE. Its inner diameter is 50 mm for beam injection. It can provide a maximal magnetic field gradient of 2.6 T/m from the measurement. Various kinds of detailed techniques for the doublet fabrication, e.g. the enwinding of capillary water-cooling conductor with outer diameter of 3 mm and inner diameter of 2 mm, the poles and yoke assembling, will be presented. The beam test results will be given as well.

Study on design method of electrostatic inflector for compact cyclotron injection system

THE STUDY AND DESIGN OF SPIRAL INFLECTOR AND CENTRAL REGION FOR CYCIAE-100 CYCLOTRON

Technical Study For Inflector And Central Region Of High Intensity Central Region Model Cyclotron

Spiral Inflector and Central Region Study for Three Cyclotrons at CIAE

Magnet Design and Engineering Technique Study on a 100mev Compact H-Cyclotron

STUDY ON SPACE CHARGE EFFECT IN THE SPIRAL INFLECTOR

Numerical Investigation for High Intensity H− Beam Injection to a 100 MeV Compact Cyclotron

Investigation for the vertical focusing enhancement of compact cyclotron by asymmetrical shimming bar

The Injection Efficiency Measurement and Analysis for Central Region Model Cyclotron.

3D Finite Element Analysis Method for Main Magnet Design of 100 MeV Compact Cyclotron

The injection line and central region design of cyciae-70

Development of Specially Designed Small Doublet for Compact Cyclotron Beam Injection

Concept design of axial injection system of CYCIAE type cyclotrons

Study and Design of the Axial Injection System at SFC

Investigation and quantitative simulation of beam physics for 230 MeV SC cyclotron under construction at CIAE

Isochronous Magnetic Field Shimming Method for Compact Cyclotrons

Beam dynamics study for a small, high current 14MeV PET cyclotron

The design and testing of an automatic rf conditioning system for the compact medical cyclotron

Magnet Design and Construction Preparation for CYCIAE-100 at CIAE

Physics design of a 70MeV high intensity cyclotron, CYCIAE-70

Physics design on the axial injection system and the central region of the l00MeV high intensity cyclone