Abstract:From the stripping points, the high intensity proton beam of a compact cyclotron travels through the fringe field area of the machine to the combination magnet. Starting from there the beams with various energy is transferred to the switching magnet for distribution to the beam line targets. In the design of the extraction and transport system for the compact proton cyclotron facilities, such as the 70MeV in France and the 100MeV in China, the space charge effect as the beam crosses the fringe field has not been previously considered; neither has the impact on transverse beam envelope coupled from the longitudinal direction. Those have been concerned much more with the higher beam-power because of the beam loss problem. In this paper, based on the mapping data of 70MeV cyclotron including the fringe field by BEST Cyclotron Inc (BEST) and combination magnet field by China Institute of Atomic Energy (CIAE), the beam extraction and transport are investigated for the 70MeV cyclotron used on the SPES project at Istituto Nazionale di Fisica Nucleare, Laboratori Nazionali di Legnaro (INFN–LNL). The study includes the space charge effect and longitudinal and transverse coupling mentioned above, as well as the matching of beam optics using the beam line for medical isotope production as an example. In addition, the designs of the ±45° switching magnets and the 60° bending magnet for the extracted beam with the energy from 35MeV to 70MeV have been made. Parts of the construction and field measurements of those magnets have been done as well. The current result shows that, the design considers the complexity of the compact cyclotron extraction area and fits the requirements of the extraction and transport for high intensity proton beam, especially at mA intensity levels.

Pulse septum magnet with low outgassing rate

Magnetic Field Analysis and Measurement of Pulsed Septum Magnet

Presenting Schur algebras as quotients of the universal enveloping algebra of gl(2)

High Intensity Proton Beam Transportation Through Fringe Field of 70 MeV Compact Cyclotron to Beam Line Targets

Structure parametric optimization and mechanical analysis of the MSe1 septum magnet

Study of Injection Scheme of a Pulsed Octupole Magnet for HLS Storage Ring

Training-free performance of the wax-impregnated SuShi septum magnet

Study on the magnetic measurement results of the injection system for CSNS/RCS

The Magnet Design of the Ssrf Storage Ring and Booster

Development of a Novel High Gradient Quadrupole Magnet

Magnetic field design for miniature pulse Penning ion source

Pulsed wire magnetic-field measurement system on permanent magnet quadrupoles

New approach for SCR selection and optimization for Septum magnet power supply with high reliability

Design and Measurement of Dipole Magnets for CSNS 1.6GeV RCS

A Simple Modification of DC Current Septa to Reduce Current Density by Half

Vacuum chambers for Swiss Light Source arcs

Design, construction, and magnetic field characterization of a Segmented Adaptive-Gap In-Vacuum Undulator prototype for NSLS-II

Open MRI Magnet with Iron Rings Correcting the Lorentz Force and Field Quality

Development of a Solid-State, High-Current, Repetitive Pulse Power System for Positron Source Prototype

Conceptual designs of dipole magnet for muon collider ring

Conceptual Design of a Portable, Solid-Nitrogen-Cooled 0.5-T/560-mm Point-of-Care MRI Magnet