Abstract:R&D of high field accelerator magnets is ongoing at the Institute of High Energy Physics, Chinese Academy of Sciences (IHEP, CAS) for pre-study of the next-generation high energy colliders like Super Proton-Proton Collider (SPPC), Future Circular Collider (FCC) and etc. A 12.47-T main field at 4.2 K has been attained in 2021 within two 14-mm apertures of LPF1-U, a superconducting model dipole magnet with Nb 3 Sn & NbTi combined common-coil configuration. Based on the experiences mastered in the LPF1 series magnets, a 16-T high field dipole magnet named LPF3 has been designed, fabricated and is in the performance test process. LPF3 is also a combined magnet with six racetrack Nb 3 Sn coils outside, expected to provide a 13-T main field within two 50-mm apertures, and with inserted HTS coils to enhance the field up to 16 T or even higher. The 13-T Nb 3 Sn dipole magnet, named LPF3-LTS, incorporates a graded common-coil configuration to enhance superconductor efficiency. The optimization of coil layouts includes varying bending radii (BR) and lengths of straight sections (LSS) to mitigate field accumulation in the outer four coils near the central posts and coil ends, respectively. Several Rutherford cables over 200 meters were fabricated for the coils winding, and with the maximum strands count of 42. The support structure for LPF3-LTS has adopted a shell-based design, with an improved “Bladder & Key” technology. Dedicated hydraulic pistons were investigated and utilized to replace the traditional bladders. The main design characteristics, fabrication process and some preliminary test results of the magnet are presented in this paper.

Magnetic Field Analysis and Measurement of Pulsed Septum Magnet

Pulse septum magnet with low outgassing rate

Presenting Schur algebras as quotients of the universal enveloping algebra of gl(2)

Structure parametric optimization and mechanical analysis of the MSe1 septum magnet

Study of Injection Scheme of a Pulsed Octupole Magnet for HLS Storage Ring

Development of short prototype of dual aperture quadrupole magnet for CEPC ring

Training-free performance of the wax-impregnated SuShi septum magnet

Ultrafast High-Energy Electron Radiography Application in Magnetic Field Delicate Structure Measurement

Study on the magnetic measurement results of the injection system for CSNS/RCS

The Magnet Design of the Ssrf Storage Ring and Booster

Conceptual designs of dipole magnet for muon collider ring

A Simple Modification of DC Current Septa to Reduce Current Density by Half

Magnetic Field Measurement, Shimming and Processing for 230 MeV Superconducting Cyclotron Main Magnet

Pulsed wire magnetic-field measurement system on permanent magnet quadrupoles

Measurement of Magnetic Field Distribution Produced by High-Current Pulse Using Zeeman Splitting of Na Emission Distributed by Laser Ablation.

A New Approach of Using Low Magnetic Field to Focus SEB

Test of a 1.8 Tesla, 400 Hz Dipole for a Muon Synchrotron

Research on Solenoidal Permanent Magnet for Guiding and Focusing Annular Electron Beams

Electromagnetic design study of a superconducting longitudinal gradient bend magnet based on the HALF storage ring

Design and Fabrication of a 13-T Twin-Aperture Superconducting Dipole Magnet with Graded Common-Coil Configuration

Development of a 1/2-length prototype high field Nb3Sn magnet for the 4th generation ECR ion source