Abstract:Continuous SiC fiber-reinforced Ti2AlNb matrix composites have a great potential for high-temperature aviation structure applications, and their properties strongly depend on the microstructure of the interfacial reaction layer. Notably, introducing diffusion barrier coatings has still been a popular strategy for optimizing the interfacial structure and interfacial properties of SiCf/Ti. In this work, C coating and C/B4C duplex coating were successfully fabricated onto SiC fibers via chemical vapor deposition (CVD), then consolidated into the SiCf/C/Ti2AlNb and the SiCf/C/B4C/Ti2AlNb composites, respectively, via hot isostatic pressing (HIP) under the condition of 970 °C, 150 MPa, 120 min, and finally furnace cooled to room temperature. The C- and C/B4C-dominated interfacial reactions in the SiCf/C/Ti2AlNb and the SiCf/C/B4C/Ti2AlNb were explored, revealing two different reaction products sequences: The different-sized TiC and the coarse-grained (Ti,Nb)C + AlNb3 for the SiCf/C/Ti2AlNb; and the fine-grained TiB2 + TiC, the needle-shaped (Ti,Nb)B2/NbB + (Ti,Nb)C, the coarse-grained (Ti,Nb)C + AlNb2 for the SiCf/C/B4C/Ti2AlNb. Annealing experiments were further carried out to verify the different reaction kinetics caused by C coating and C/B4C duplex coating. The reaction layer (RL)-dominated interfacial strength and tensile strength estimations showed that higher interface strength and tensile strength occurred in the SiCf/C/Ti2AlNb instead of the SiCf/C/B4C/Ti2AlNb, when the same failure mode of fiber push-out took place.

Directional solidification of Al/C composites

Forming process of hot-extruded SiCw/6061AI composites(I)

Study on dispersion of Ti2AlC particle and formation of columnar crystal with different solidification rates during CCDS TiAl-based composite

Study on Dispersion of Ti 2 AlC Particle and Formation of Columnar Crystal with Different Solidification Rates During CCDS TiAl-based Composite

Directional Solidification of Nano-Sized SiC Particles Reinforced AZ91D Composites

Preliminary investigation of directionally solidified NiAl–28Cr–5.5Mo–0.5Hf composite

Solidification of Cast Aluminum Matrix Composites

Anisotropic microstructures and mechanical properties of textured Ti3AlC2/TiAl3/Al composite

Directional Solidification Properties of the In-Situ Composite Cu-Cr Alloy

Microstructures and Mechanical Properties of Directionally Solidified C-containing Γ-Tial Alloys Via Electromagnetic Cold Crucible

Effectively enhanced strength by interfacial reactions in in-situ carbon reinforced Al matrix composites

Investigation of a Directionally Solidified NiAl/Cr(Mo) Composite Alloyed with Hf

Effects of Heating Power on Microstructure Evolution and Tensile Properties at Elevated Temperature by Directional Solidification for Ti2AlC/TiAl Composites

Interfacial Reactions and Mechanical Properties Studies of C-Coated and C/B4C Duplex-Coated SiC Fiber-Reinforced Ti2AlNb Composites

The Directional Solidification, Microstructural Characterization and Deformation Behavior of Β-Solidifying TiAl Alloy

Effect of Pressure on the Solidification Behavior and Mechanical Properties of SiCp/Al-Mg Composites

Investigation on the solidification microstructure, microsegregation and mechanical properties of CF/Al-4.5Cu metal matrix composites

Investigation of macro/microstructure evolution and mechanical properties of directionally solidified high-Nb TiAl-based alloy

Dependence of microstructure and mechanical properties on solidification condition of directionally solidified Zn-55Al-1.6Si alloys

Microstructures and Mechanical Properties of Directionally Solidified Ni-25%Si Full Lamellar in Situ Composites

Microstructure and Thermal Conduction Property of SiCp/Al- Si Composite with High Reinforcement Content