Abstract:The NiAl-Cr(Mo) eutectic alloy has better fracture toughness and high temperature strength among NiAl alloys. Hf addition can raise the high temperature strength of NiAl-Cr(Mo) eutectic alloy further, but decreases its room temperature compressive properties obviously; which is caused by the microsegregation of Heusler phases. The NiAl-Cr(Mo)-0.5Hf alloy was rapidly solidified and then hot isostatic pressed (HIP) or high temperature treated (HTT) in order to improve the structure and property of this eutectic alloy. The results reveal that rapid solidification can well refine the microstructure of eutectic alloy and keep more amount of Hf solid solution phase in the alloy. Simultaneously, the shapes and distributions of the Heusler (Ni2AlHf) phases and Hf solid solution phases are well improved. After the HIP treatment, more Heusler phases are transformed into Hf solid solution phases, and the distributions of Heusler phases and Hf solid solution phases become homogeneous, and moreover the primary NiAl phases become coarsening obviously. After HTT, the amount of primary NiAl phases decreases a little, the Heusler phases and Hf solid solution phases become finer. The rapid solidification improves the room temperature compressive properties of the alloy significantly, the HIP and HTT improve its high temperature compressive properties further.

Investigation of a Directionally Solidified NiAl/Cr(Mo) Composite Alloyed with Hf

Microstructure, interface and mechanical property of the DS NiAl/Cr(Mo,Hf) composite

Preliminary investigation of directionally solidified NiAl–28Cr–5.5Mo–0.5Hf composite

Investigation on microstructure and mechanical property of NiAl-28Cr-5Mo-1Hf alloy

Effect of Hot Isostatic Pressing on Microstructure and Mechanical Property of Nial/Cr(Mo,Hf) Composite

Effects of Hf additions on high-temperature mechanical properties of a directionally solidified NiAl/Cr(Mo) eutectic alloy

Microstructure, Brittle–ductile Transition Temperature and Elevated Temperature Compressive Behavior of the Directionally Solidified NiAl–Cr(Mo)–Hf Alloy

Investigation of Heusler phase Ni2AlHf and G-phase Ni16Hf6Si7 in a directionally solidified NiAl-28Cr-5.5Mo-0.5Hf alloy

Tensile Properties and Microstructure of DS NiAl—28Cr—5.8Mo—0.2Hf Alloy

Deformation Behavior and Microstructure of Ds Nial/Cr(Mo) Alloy Containing Hf

Microstructure and Phase Stability Studies on Heusler Phase Ni2AlHf and G-phase Ni16Hf6Si7in Directionally Solidified NiAl–Cr(Mo) Eutectic Alloyed with Hf

Microstructure and Mechanical Properties Determined in Compressive Tests of Quasi-Rapidly Solidified NiAl-Cr(Mo)-Hf Eutectic Alloy after Hot Isostatic Pressure and High Temperature Treatments

Effect of HIP on precipitations and tensile properties of directionally solidified NiAl/Cr(Mo,Hf) alloy

Microstructure Characteristics and Mechanical Properties of NiAl/Cr(Hf, Ho) in Situ Composite

The microstructure of a directionalloy solidified NiAl-Cr(Mo)-Hf alloy

Effects of Hip and Heat Treatment on Microstructure and Compressive Properties of Rapidly Solidified Nial-Cr(Mo)-Hf Eutectic Alloy

TENSILE CREEP BEHAVIOR OF DIRECTIONALLY SOLIDIFIED NiAl-28Cr-5.8Mo-0.2Hf ALLOY

Investigation on intermetallic NiAl-Cr(Mo, Hf) alloys

Investigation on Superplastic of Directionally Solidified Nial Multiphase Alloy

Investigations on the Solidification Microstructures and Room Temperature Compression Properties of Nb-doped NiAl-32Cr-6Mo Hypereutectic Alloy

Microstructure Characteristics and Compressive Properties of NiAl-based Multiphase Alloy During Heat Treatments