Abstract:This work prepared CrMnFeCoNi/TiAl composites using CrMnFeCoNi high-entropy alloy and Ti-47Al-2Cr-2Nb alloy as raw materials by powder metallurgy. The effects of varying CrMnFeCoNi contents on the microstructure and high-temperature mechanical properties of the TiAl matrix composites were studied. The experimental results indicate that the CrMnFeCoNi particles exhibit a uniform distribution and strong integration with the TiAl matrix. Furthermore, the high-temperature tensile strength of the composites is found to be comparable to that of the pure Ti-47Al-2Cr-2Nb alloy. The elongation of the composites exhibits a positive correlation with the CrMnFeCoNi contents, as evidenced by the increase in elongation with higher concentrations of CrMnFeCoNi. Specifically, the elongation reaches 69.3% for the composite sample containing 6 wt.% CrMnFeCoNi particles, which is 33.3% higher than that of the TiAl matrix. This significant increase in elongation can be attributed to the favorable deformation ability of the CrMnFeCoNi at elevated temperatures. At the same time, refining grain also improves its co-deformation ability and then its plastic deformation ability. During the fracture process, cracks propagate within the matrix or along the interface. The introduction of CrMnFeCoNi improves the ductility and helps to improve the hot processability of TiAl alloy, thus expanding its potential applications.

Preliminary investigation of directionally solidified NiAl–28Cr–5.5Mo–0.5Hf composite

Investigation of a Directionally Solidified NiAl/Cr(Mo) Composite Alloyed with Hf

Microstructure, interface and mechanical property of the DS NiAl/Cr(Mo,Hf) composite

Tensile Properties and Microstructure of DS NiAl—28Cr—5.8Mo—0.2Hf Alloy

Effects of Hf additions on high-temperature mechanical properties of a directionally solidified NiAl/Cr(Mo) eutectic alloy

Investigation on microstructure and mechanical property of NiAl-28Cr-5Mo-1Hf alloy

Microstructure Characteristics and Mechanical Properties of NiAl/Cr(Hf, Ho) in Situ Composite

Microstructure, Brittle–ductile Transition Temperature and Elevated Temperature Compressive Behavior of the Directionally Solidified NiAl–Cr(Mo)–Hf Alloy

Tensile and fatigue properties of the Bridgman directionally solidified Fe-Al-Ta eutectic

The microstructure of a directionalloy solidified NiAl-Cr(Mo)-Hf alloy

Effect of Hot Isostatic Pressing on Microstructure and Mechanical Property of Nial/Cr(Mo,Hf) Composite

ZrO 2 Strengthened NiAl/Cr（Mo,Hf） Composite Fabricated by Powder Metallurgy

Microstructure and High-Temperature Mechanical Properties of CrMnFeCoNi/TiAl Composites Prepared by Powder Metallurgy

STUDY ON MICROSTRUCTURE AND ELEVATED TEMPERATURE MECHANICAL PROPERTY OF DIRECTIONALLY SOLIDIFIED NiAl ALLOY Ⅱ. Elevated Temperature Mechanical Property and Interface

Microstructure and Mechanical Properties Determined in Compressive Tests of Quasi-Rapidly Solidified NiAl-Cr(Mo)-Hf Eutectic Alloy after Hot Isostatic Pressure and High Temperature Treatments

Deformation Behavior and Microstructure of Ds Nial/Cr(Mo) Alloy Containing Hf

Investigation on intermetallic NiAl-Cr(Mo, Hf) alloys

Preliminary Investigation on Strong Magnetic Field Treated NiAl–Cr(Mo)–Hf Near Eutectic Alloy

STUDY ON MICROSTRUCTURE AND ELEVATED TEMPERATURE MECHANICAL PROPERTY OF DIRECTIONALLY SOLIDIFIED NiAl ALLOY I. Microstructure and Brittle-to-Ductile Transition Temperature

TENSILE CREEP BEHAVIOR OF DIRECTIONALLY SOLIDIFIED NiAl-28Cr-5.8Mo-0.2Hf ALLOY

Preparation and Properties of Nano-HfO2 Reinforced NiAl Intermetallics Fabricated with Powder Metallurgy