Abstract:Palygorskite clay supported Cp2TiCl2 catalyst system was developed and evaluated by ethylene slurry polymerization.The inorganic carrier was thermally activated at 500℃ to generate surface Lewis acidity,which was confirmed by pyridine adsorption experiment and subsequent FTIR spectra analysis.Two types of supported catalysts were prepared:immobilizing the metallocene catalyst directly on the carrier(Cat-A)and also on the carrier with methylaluminoxane(MAO)modification(Cat-B).Polymerization was carried out in toluene at 40℃ and 60℃ with the supported Cp2TiCl2 catalyst and homogeneous analogue.Cat-A gave higher catalyst activity compared with Cat-B,and was even more robust than corresponding homogeneous catalyst.This specifically high activity of Cat-A was attributed to the surface Lewis acidity of the thermally activated clay.Models of active surface species were discussed in comparison with silica supported metallocene catalyst.With the directly supported catalyst,molecular weights and melting points of the polymer products were lower than those of the polymer products obtained with Cat-B,and the polymer properties were much more affected by the polymerization temperature.By analyzing the SEM photographs of polymers at different polymerization stages,morphological replication of the single fiber of palygorskite was revealed and a final polyethylene “fiber cluster” structure was formed.This interesting evolution of polymer morphology was further discussed in relation to polyethylene/clay composite and the method of improving the final polymer morphology.

Study on preparation of polyolefins over complex support catalysts I. Preparation of ethylene-propylene copolymer over VOCl3/MgCl2/NaY ( SiO2)

Studies on Vocl3/Mgcl2/Nay/Al(2)Et(3)Cl(3) Complex Support Catalysts for the Copolymerization of Ethylene and Propylene

Effects of Precomplexation on Activity of TiCl4/SiO2-MgCl2Catalyst in Propylene Polymerization and Polymer Particle Morphology

ETHYLENE POLYMERIZATION WITH CORE-SHELL ZIEGLER-NATTA HYBRID CATALYSTS

Preparation of Polypropylene/MMT Nanocomposites Using Complex Supported Catalysts

Core-shell Polymer/Cp2TiCl2 Catalysts and Their Behaviors in Ethylene Polymerization

PREPARATION OF ULTRA HIGH MOLECULAR WEIGHT POLYETHYLENE USING STRUCTURED NANOPARTICAL ZIEGLER-NATTA CATALYSTS

Characteristics of Palygorskite Supported Cp_2 TiCl_2 Catalysts for Ethylene Polymerization

Preparation of silica-supported late transition metal catalyst and ethylene polymerization

Ethylene Polymerization over Mgcl2/Sio2 Bi-Supported Ziegler-Natta Hybrid Titanium/Vanadium Catalysts

Study on the kinetics of supported catalysts for propylene polymerization in slurry

Preparation and Characterization of Novel Polyethylene Supported Metallocene Catalysts

Ethylene polymerization using a novel MgCl2/SiO2-supported Ziegler–Natta catalyst

Study of propylene polymerization catalyzed by spherical MgCl2 -supported ziegler-natta catalyst system: Preparation of spherical support

PREPARATION OF NOVEL POLYETHYLENE-graft-POLY(4-VINYLPYRIDINE)-SUPPORTED METALLOCENE CATALYSTS FOR ETHYLENE POLYMERIZATION

Study on Ethylene-α-Olefin Copolymerization Catalyzed by the MgCl2-Supported and Low Ti-Loading Ziegler–Natta Catalyst

High temperature polymerization of propylene catalyzed by MgCl2-supported Ziegler–Natta catalyst with various cocatalysts

Studies on Synthesis of Low Isotactic Polypropylene by Using a Novel MgCl2-supported and Low Ti-loading Catalyst

Exploring Si/Mg Composite Supported Ziegler-Natta Ti-based Catalysts for Propylene Polymerization

Effects of Ti/Mg molar ratio on bi-supported SiO2/MgCl2 (ethoxide type)/TiCl4 catalysts in ethylene homopolymerization and ethylene/1-hexene copolymerization

With different structure ligands heterogeneous Ziegler–Natta catalysts for the preparation of copolymer of ethylene and 1-octene with high comonomer incorporation