Abstract:One of the main energy sources utilized to produce power is coal. Due to the lack of combustion enhancement, the main issue with coal-based power plants is that they produce significant amount of pollutants. The major problem of slagging formation within the boiler; it sticks to the water tube walls, superheater, and reheater. Slagging might decrease the heat transferred from the combustion area to the water or steam inside the tubes, increasing the amount of coal and extra air. The abrupt fall of slag on the tube surface into the water-filled seal-trough at the bottom of the furnace might occasionally cause boiler explosions. In order to maximize heat transmission to the water and steam tubes by reducing or eliminating slag formation on the tube surface, the work presented here proposes an appropriate computational fluid dynamics (CFD) technique with a genetic algorithm (GA) integrated with conventional supercritical power plant operation. Coal usage and surplus air demand are both decreased concurrently. By controlling the velocity and temperatures of primary air and secondary air, the devised technique could optimize the flue gas temperature within the furnace to prevent ash from melting and clinging to the water and steam tube surfaces. Heat transmission in the furnace increased from 5945.876 W/m2 to 87,513.9 W/m2 as a result of the regulated slag accumulation. In addition to reducing CO2 emissions by 8.55 tonnes per hour and saving close to nine tonnes of coal per hour, the boiler's efficiency increased from 82.397% to 85.104%.

Study on the Safety Evaluation of Combustion System in Combined Cycle Power Plant

Safety System Analysis on Gas-Steam Combined Cycle Power Plant

Advanced Exergoenvironmental Evaluation for a Coal-Fired Power Plant of Near-Zero Air Pollutant Emission

Exergoeconomic Analysis of A Combined Cycle System Utilizing Associated Gases from Steel Production Process Based on Structural Theory of Thermoeconomics

Exergoenvironmental Evaluation for Combined Cycle Power Generation System Based on Life Cycle Assessment

STUDY ON ELIMINATING FIRE-CARRYING IN PRIMARY AIR JET ORIFICE BY ADMIXING EXHAUST GAS

Feasibility Study for Blended Gas Fuel Combustion in Boilers of Thermal Power Plant

The integrated analysis of economy and safety on SOFA running mode of a 600MWe boiler

Experimental research on the fire-carrying problems in primary air nozzle of 125 MW units

Investigation on slagging and high-temperature corrosion prevention and control of a 1000 MW ultra supercritical double tangentially fired boiler

Energy and Exergy Analysis on a Blast Furnace Gas-Driven Cascade Power Cycle

Study on explosion risk assessment of low‐concentration gas safe combustion system based on FAHP‐fuzzy fault tree

Study on the Flame Monitoring and Combustion Diagnosis Control Optimizing Inside Pulverized Coal Boiler of Power Plant

A technique to control major hazards of the coal gasification process developed from critical events and safety barriers

Experimental and Numerical investigations in a gas-fired boiler with combustion stabilizing device

Multi-injection Multi-Staging Combustion Mechanistic Studies and Down-Fired Boiler Technology

The Application Of Furnace Safety Supervisory System (Fsss) In The Oil-Fired Utility Boiler

Study on an Environmental-Friendly and High-Efficient Fuel Cell Energy Conversion System.

A Brief Review of the Combustion Diagnosing Techniques for Coal-Fired Boilers of Power Plants in China

The Industrial Application of Gas Reburning Technology in a 350 MW Boiler Unit at Bao Steel Works Power Plant

Investigation of Supercritical Power Plant Boiler Combustion Process Optimization through CFD and Genetic Algorithm Methods