Abstract:The control algorithm could greatly help the suspension system improve the comprehensive performance of the vehicle. Existing control methods need to obtain the intermediate states, which are difficult to obtain directly or accurately when estimated by filters or observers. Thus, this paper proposed a new practical finite state LQR control method to deal with this problem. By combining with the output state of the finite sensor of the vehicle suspension system and weakening the unknown state as the goal, an optimization model is established with the design variables as the LQR weight coefficients. Then, the direct relationship between the current control input and the finite sensor output is obtained, and the finite state LQR control is realized. Taking the quarter-car suspension model as an example, the corresponding noise is added considering sensor accuracy, and the control performance of the four control methods is studied considering the uncertainties of suspension system parameters. In addition, the acceleration of sprung mass and the dynamic travel coefficient of suspension have been separately calculated by methods of finite state LQR control, LQR control, and PID control. The results show that there is not much difference between them under shock excitation or random excitation. However, the finite state LQR control method has the best comprehensive control performance in that its dynamic tire load coefficient is better than other methods; it could take into account the suspension work stroke coefficient, dynamic tire load coefficient, and sprung mass' acceleration of the vehicle suspension system at the same time. In order to realize the optimal control effect with limited sensor arrangement, the finite state LQR control method only needs to obtain the current sensor output and the current control input, without estimating the unknown intermediate state. By this means, the proposed control method greatly simplifies the design of the control system and has great advantages on practical value.

LQG Controller Design for Heavy Vehicle Active Suspension Based on OT-AHP Method

The Design of LQG Controller of Active Suspension

Multi-objective and Multi-criteria Decision Optimization of Automobile Suspension Parameters

Tuning Parameters of the Fractional Order PID-LQR Controller for Semi-Active Suspension

Multi-objective Control of Vehicle Active Suspension Systems Via Load-Dependent Controllers

Optimal Design of Active Suspension Controller Based on Genetic Algorithm

Active Control of Vehicle Suspension Systems Based on Modal Decomposition Method

A Study on the Order Reduction of Vehicle Active Suspension Controller by Using Minimum Information Loss Method

Integrated performance optimum design of heavy truck air suspension based on fuzzy control

Optimal Control of an Active Suspension System Applying Distributed Parameter Simulation Test

Controller design and multi-objective optimization of heavy goods vehicle suspension system by geometry-inspired GA

Linear Quadratic Optimal Control with the Finite State for Suspension System

A LQG Control Strategy for a New Type of Active Suspensions in Road Surface Status Inspection Vehicles

Optimal Control of Semi-Active Suspension for Agricultural Tractors Using Linear Quadratic Gaussian Control

Output Feedback H∞ Control Combining Moving Horizon Scheme for Active Suspension Based on LMI Approach

LQR control scheme for active vehicle suspension systems based on modal decomposition

Design of Active Suspension Controller Based on Stochastic Linear Optimal Control Theory

Performance evaluation and analysis for hydraulic active suspension using the collaborative control method

Active suspension LQR control based on modified differential evolutionary algorithm optimization

Multi-objective H2/H∞ control of uncertain active suspension systems with interval time-varying delay

Ant Colony Optimization Tuned Closed-Loop Optimal Control Intended For Vehicle Active Suspension System