Abstract:Background: Biomass usage for energy purposes has emerged in response to global energy demands and environmental problems. The large amounts of by-products generated during logging are rarely utilized. In addition, some species (e.g., Quercus spp.) are considered less valuable and are left in the cutting areas. Production of pellets from this alternative source of biomass may be possible for power generation. Although the pellets may be of lower quality than other types of wood pellets, because of their physical and technological properties, the addition of different raw materials may improve the characteristics of the oak pellets. Methods: Sawdust from the oak species Quercus sideroxyla, Q. rugosa, Q. laeta and Q. conzattii was mixed with sawdust from the pine Pinus durangensis in different ratios of oak to pine (100:0, 80:20, 60:40, 40:60 and 20:80). Physical and mechanical properties of the pellets were determined, and calorific value tests were carried out. For each variable, Kolmogorov-Smirnov normality and Kruskal-Wallis tests were performed and Pearson's correlation coefficients were determined (considering a significance level of p < 0.05). Results: The moisture content and fixed carbon content differed significantly (p < 0.05) between the groups of pellets (i.e., pellets made with different sawdust mixtures). The moisture content of all pellets was less than 10%. However, volatile matter and ash content did not differ significantly between groups (p ≥ 0.05). The ash content was less than 0.7% in all mixtures. The addition of P. durangensis sawdust to the mixtures improved the bulk density of the pellets by 18%. Significant differences (p < 0.05) in particle density were observed between species, mixtures and for the species × mixture interaction. The particle density was highest in the 80:20 and 60:40 mixtures, with values ranging from 1,245 to 1,349 kg m-3. Bulk density and particle density of the pellets were positively correlated with the amount of P. durangensis sawdust included. The mechanical hardness and impact resistance index (IRI) differed significantly (p < 0.05) between groups. The addition of pine sawdust decreased the mechanical hardness of the pellets, up to 24%. The IRI was highest (138) in the Q. sideroxyla pellets (100:0). The mechanical hardness and IRI of the pellets were negatively correlated with the amount of P. durangensis sawdust added. The bulk density of the pellets was negatively correlated with mechanical hardness and IRI. The calorific value of mixtures and the species × mixture interaction differed significantly between groups. Finally, the mean calorific value was highest (19.8 MJ kg-1) in the 20:80 mixture. The calorific value was positively related to the addition of P. durangensis sawdust.

Preparation and characterization of sawdust derived bio-fuel pellets depending on "solid bridge" intertwining action of hyacinth fiber

Enhancement on the properties of polypropylene using bamboo particles: Effect of particle sizes and loadings

Experiment research on utilization of particle biomass fuel in sintering process

Review on Biomass Fluidized Bed Combustion/Gasification Sintering Characteristic and Mechanism

Investigation on the Properties of the Bio-Briquette Fuel Prepared from Hydrothermal Pretreated Cotton Stalk and Wood Sawdust

Research on the hot densification mechanism of biomass wastes based on molecular dynamics simulation and components adjustment method

Effect of Hydrothermal and Hydrothermal Oxidation Pretreatment on the Physicochemical Properties of Biofuel Pellet

Gasification of Binderless Co‐pelletized Hydrochars from Banana Leaves and Coconut Sawdust

Characterization of binderless fuel pellets from macrophyte Azolla blended with forestry biowaste

Characterization and quality analysis of biomass pellets prepared from furfural residue, sawdust, corn stalk and sewage sludge

Characterizing biomass pellets produced from torrefied biowaste and waste medical plastic pyrolysis oil

Improving the physical, mechanical and energetic properties of Quercus spp. wood pellets by adding pine sawdust

Insights into the pelletization behaviors of artificial lignocellulosic biomass based on cellulose, hemicellulose and lignin: A simplex lattice mixture design approach

In-situ torrefaction-densification approach for pelletizing of rice hull/rice stalk and the combustion behavior analysis

Torrefaction and Densification of Wood Sawdust for Bioenergy Applications

Recent development in production of pellet fuels from biomass and polyethylene (PE) wastes

Analysis on hot briquetting mechanism of biomass fuel pellets

Utilizing hydrolysis residue from bioethanol production as an additive for solid fuel pellets

Heavy bio‐oils as bio‐binders for rice husk densification: Parameter optimization, binding mechanisms and subsequent pyrolysis and combustion performances

Effect of in-situ torrefaction and densification on the properties of pellets from rice husk and rice straw

Densification of Wood—Influence on Mechanical and Chemical Properties when 11 Naturally Occurring Substances in Wood Are Mixed with Beech and Pine