Experimental investigation on shear responses of RUHTCC beams without stirrups

Lijun Hou,Da Chen,Shilang Xu,Xiufang Zhang
DOI: https://doi.org/10.3969/j.issn.1001-0505.2014.01.024
2014-01-01
Abstract:In order to understand the shear behavior of ultrahigh toughness cementitious composite (UHTCC),the bending tests on six reinforced UHTCC (RUHTCC)beams and four reinforced con-crete (RC)comparison beams were performed under a concentrated loading at mid-span.The varied parameters were the shear-span ratio and the reinforcement ratio.The shear responses of the RU-HTCC beams and those of the RC beams were compared,including the diagonal crack pattern,the load-deflection curve,the shear cracking load,the ultimate shear capacity and the shear strength, etc.The experimental results indicate that with the increase in the reinforcement ratio and the de-crease in the shear-span ratio,the failure mode of the RUHTCC beams transforms from flexure-shear to shear-compression and the ultimate shear capacity rises gradually.The ultimate shear capacity of the RUHTCC beams is about twice that of the RC beams,and the average ultimate shear strength of the RUHTCC beams is about 0.86 times that of the ultimate tensile strength of the UHTCC.The RUHTCC beams present the stable propagation of multiple fine diagonal cracks,with the maximum crack width below 0.1 mm under the ultimate service condition.The minimum web reinforcement ratio is not required for the RUHTCC beams due to its large post-cracking reserve shear capacity and fine crack controlling capability.
What problem does this paper attempt to address?