Abstract:Silica nanoparticles are widely utilized abrasives in chemical mechanical polishing (CMP), and the modification of abrasives and the incorporation of chemical additives represent primary strategies for enhancing CMP performance. In this study, we achieved a modification of the electrical properties of the colloidal silica surface by forming a coating film through the "grafting" of 3-aminopropyltriethoxysilane (APTES) onto the colloidal silica surface. This modification resulted in an augmented mechanical interaction between the abrasive and the wafer during the CMP process, leading to an enhanced material removal rate (MRR) of SiO 2 . However, the post-CMP surface exhibited a relatively higher occurrence of surface defects. Subsequently, cetyltrimethylammonium bromide (CTAB) was added as an auxiliary additive, which promoted the formation of a "special electrostatic self-assembly structure" on the surface of the abrasive, further elevating the SiO 2 MRR. Moreover, CTAB demonstrated the capability to adsorb onto the wafer surface, creating a protective effect that resulted in reduced surface roughness and a decrease in surface defects following CMP. Furthermore, comprehensive characterization of the modified abrasive was conducted using techniques such as transmission electron microscopy (TEM) and scanning electron microscopy (SEM). The mechanisms underlying the improvement in CMP performance were systematically analyzed through experimental phenomena and X-ray photoelectron spectroscopy (XPS), and revealing that the introduction of CTAB indirectly facilitated the adsorption of APTES onto the surface of the colloidal silica. Our study provides a method for the advanced process of SiO 2 CMP with stringent metal ion requirements.

Effect of Modified Silica Abrasive Particles on Nanosized Particle Deposition in Final Polishing of Silicon Wafers

Particles Manipulation to Improve Removal Efficiency of Fused Silica in Chemical Mechanical Polishing

Effect of nanosilica abrasive properties on tungsten chemical mechanical planarization

Preparation of Silane Modified Sio2 Abrasive Particles and Their Chemical Mechanical Polishing (cmp) Performances

Influence of Colloidal Silica Dispersion on the Decrease of Roughness in Silicon Chemical Mechanical Polishing

Achieving Ultralow Surface Roughness and High Material Removal Rate in Fused Silica Via a Novel Acid SiO2 Slurry and Its Chemical-Mechanical Polishing Mechanism

A special electrostatic self-assembly structure of colloidal silica: Improving Chemical Mechanical Polishing performance

Application of surface analysis in study on removal mechanism and abrasive selection during fused silica chemical mechanical polishing

Methods and Mechanistic Analysis of Improving the Dispersion of Nano Silica Colloidal Particles in Chemical Mechanical Polishing Slurries

Optimizing of the Colloidal Dispersity of Silica Nanoparticle Slurries for Chemical Mechanical Polishing

Optimization of polishing fluid composition for single crystal silicon carbide by ultrasonic assisted chemical-mechanical polishing

Effect of Polyoxyethylene-Based Nonionic Surfactants on Chemical–Mechanical Polishing Performance of Monocrystalline Silicon Wafers

Experimental and Theoretical Study on the Influence of Fatty Alcohol Polyoxyethylene Ether on the Surface Roughness of Silicon in Alkaline Solutions

Preparation of Non-spherical Colloidal Silica Nanoparticle and Its Application on Chemical Mechanical Polishing of Sapphire

Preparation of three-dimensional dendritic-like mesoporous silica particles and their pore size-dependent polishing behavior and mechanism

Single crystal silicon wafer polishing by pretreating pad adsorbing SiO2 grains and abrasive-free slurries

Polishing Characteristics on Silicon Wafer Using Fixed Nano-Sized Abrasive Pad

Enhancing Slurry Stability and Surface Flatness of Silicon Wafers through Organic Amine-Catalyzed Synthesis Silica Sol

Core–Shell Structured Silica Nanoparticles as Abrasive for Tungsten Chemical Mechanical Planarization

Polymer coated γ-aminopropyltriethoxysilane-modified α-alumina non-spherical nanocomposite abrasives and their chemical mechanical polishing behavior on glass-ceramic substrate

Atomistic Mechanisms of Si Chemical Mechanical Polishing in Aqueous H2O2: ReaxFF Reactive Molecular Dynamics Simulations